Add Network Connections

With bonding interfaces, the system can bond two or more physical network interfaces to one interface. All physical interfaces in the bond act as one interface. This allows for an active failover between the interfaces if an interface's physical con...

Additional Ethernet interfaces can be added and configured when an additional physical interface is added. This can occur during a Nodegrid Manager installation, where the System might have more than two interfaces to better support network separati...

Mobile Broadband interfaces can be configured when a mobile broadband modem is available to the device. The Nodegrid SR family (NSR, GSR, BSR, LSR, HSR) support built-in modems available as optional add-ons. For all other units, external modems can ...

VLAN Interfaces allow the Nodegrid system to natively tag network traffic with a specific VLAN ID. For this, a VLAN Interface needs to be created. The VLAN interface will behave and allows the same settings as any other network interface on in Nodeg...

With Bridge interfaces, the System can create a virtual switch that crosses one or more interfaces. The switch is completely transparent to the network interfaces and does not require additional setup. The most common use for a bridge network is eas...

With the analog modem interface, administrators can configure an existing analog modem and required PPP connection details. A supported analog modem must be connected to the Nodegrid System. Go to Network :: Connections . Click Add (displays d...

Go to Network :: Connections . Click Add (displays dialog). Enter Name . On Type drop-down, select PPPoE   (dialog changes) .  Enter Description. If Connect Automatically checkbox is selected, connection is automaticall...

Go to Network :: Connections . Click Add (displays dialog). Enter Name . On Type drop-down, select Loopback   (dialog changes) .  Enter Description If Connect Automatically checkbox is selected, connection is automatica...