--- title: "Add PPPoE Interface" slug: "add-pppoe-interface" updated: 2026-05-19T13:39:00Z published: 2026-05-19T13:39:00Z canonical: "docs.zpesystems.com/add-pppoe-interface" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.zpesystems.com/llms.txt > Use this file to discover all available pages before exploring further. # Add PPPoE Interface 1. Go to the *NETWORK::CONNECTIONS* page 2. Click **Add** (displays dialog) 3. Enter **Name** 4. On **Type** drop-down, select **PPPoE** (dialog changes) ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1678388724105.png) 5. Enter **Description** 6. If **Connect Automatically** checkbox is selected, connection is automatically established at startup 7. **Set as Primary Connection** checkbox (defines interface as the primary connection. Only one interface can be the primary.) 8. Select **Block Unsolicited Incoming Packets** checkbox (automatically blocks all inbound connections on the interface). 9. In *PPPoE Connection* menu, enter details: 1. **Parent Interface** (default: blank) Specifies the parent interface name on which this PPPoE connection should be created. If blank, connection is activated on the ethernet interface 2. **Service** (default: blank) Specifies PPPoE only initiates sessions with access concentrators that provide the specified service. For most providers, leave blank. Required only if there are multiple access concentrators or a required specific service. Access concentrators grants access to multiple users with needing a dedicated connection for each user. 3. Enter **Username** and **Password** 10. If **Enable IP Passthrough** checkbox selected (expands dialog) enter details: ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1678388949297.png) 1. **Ethernet Connection** drop-down, select one (ETH0, ETH1, hotspot) 2. **MAC Address** 3. **Port Intercepts** 11. In *IPv4 Mode* menu, select one: - **No IPv4 Address** radio button - **DHCP** radio button 12. In *IPv6 Mode* menu, select one: - **No IPv6 Address** radio button - **Address Auto Configuration** radio button 13. Click **Save**.