Connect to the Console Port

Use the provided CAT5e and RJ45-DB9 Z000036 adapter/cable to communicate with the Nodegrid unit.

1. Connect one end of the CAT5e cable to the Nodegrid console port.
2. Connect the other end to the RJ45-DB9 adapter.
3. Plug the adapter into the PC's DB9 COM port.
   If no DB9 COM port, use a USB-DB9 adapter (not provided).
4. On the PC, use a serial application (Xterm, TeraTerm, PuTTY, SecureCRT) to open a terminal session to the COM port:
5. Set it to: 115200bps, 8 bits, no parity, 1 stop bit, no flow control settings.