Nodegrid Net Services Router Expansion Modules
- 18 Apr 2023
- 1 Minute to read
- Print
- DarkLight
- PDF
Nodegrid Net Services Router Expansion Modules
- Updated on 18 Apr 2023
- 1 Minute to read
- Print
- DarkLight
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
The Nodegrid Net Services Router has up to five slots for modules that provide extreme flexibility and expanded functionality.
Nodegrid Net Services Router Expansion Modules
Module | Image | Specification |
16-Port 1GbE |
| 1000BASE-T Cat5e or better |
16-Port SFP 1GbE |
| Supports all SFP Modules |
8-Port SFP+ 10GbE |
| Supports all SFP+ Modules |
8-Port PoE+ |
| 25.5W mapower per port Total ma150W PoE+ available Configurable power budget |
16-Port Serial |
| RJ45 Serial Rolled port ma230,400 bps |
16-Port USB |
| USB 2.0 interfaces Type A |
M.2 Cellular + Antenna |
| For up to 24G/LTE modems |
M.2 SATA |
| For up to 2mSATA storage modules |
Storage |
| For 2.5" SATA (HDD/SDD) storage |
Compute |
| Compute module (server on a card), provides independent compute capabilities. |
Expansion Module Compatibility Chart
Expansion card | Slot 1 | Slot 2 | Slot 3 | Slot 4 | Slot 5 |
16-Port GbE Ethernet | ✓ | ✓ | ✓ | Secure Isolated Mode ** | Secure Isolated Mode ** |
16-Port SFP | ✓ | ✓ | ✓ | Secure Isolated Mode ** | Secure Isolated Mode ** |
16-Port Serial | ✓ | ✓ | ✓ | ✓ | ✓ |
16-Port USB | ✓ | ✓ | ✓ | ✓ | ✓ |
M.2 Cellular / WiFi | ✓ | ✓ | ✓ | ✓ | ✓ |
8-Port SFP+ | ✓ | ✓ | ✓ | Secure Isolated Mode ** | Secure Isolated Mode ** |
8-Port POE+ | ✓ | ✓ | ✓ | — | — |
Compute | ✓ | ✓ | ✓ | Secure Isolated Mode ** | Secure Isolated Mode ** |
Storage * | — | — | — | ✓ | ✓ |
M.2 SATA * | — | — | — | ✓ | ✓ |
NOTES
(*) The Nodegrid Net Services Router supports a maximum of 2 SATA drives, which can be divided into 2 Storage cards or in one M.2 SATA card.
(**) The Secure Isolated Mode allows for the management of the cards as if they would be located in a normal Slot, but the network traffic is isolated from any other slot.
(**) The Secure Isolated Mode allows for the management of the cards as if they would be located in a normal Slot, but the network traffic is isolated from any other slot.
Configure Extra Storage Devices on NSR
IMPORTANT
When additional storage is added, special steps are required to allow the system to see more than one disk (i.e., use both storage and an LTE/M2.SATA module).
If using Storage and LTE/M2.SATA:
- LTE/M2.SATA must be installed in slot 4.
- Storage module must be installed in slot 5.
- M2.SATA must be installed in Channel A.
- Modem must be installed in Channel B.
- In the WebUI, go to System :: Slots :: 5.
- Select Allow SATA card in slot 5 checkbox.
- Click Save.
Was this article helpful?