---
title: "USB Sensors sub-tab"
slug: "usb-sensors-sub-tab"
updated: 2024-12-13T06:52:48Z
published: 2024-12-13T06:52:48Z
canonical: "docs.zpesystems.com/usb-sensors-sub-tab"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.zpesystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# USB Sensors sub-tab

## Introduction

Go to *Tracking :: HW Monitor :: USB Sensors*.

The details shown depend on the Nodegrid device. ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1678291434646.png)

Nodegrid USB Temperature and Humidity Sensors are automatically discovered by the System (usb_sensor). After detection, it must be enabled to use with monitoring and alarm management.

Click a sensor to open a detail page. A click on the **Sensor Status** button displays more details and specifics.

## **ZPE USB Environmental Sensors and Actuators**

| **ZPE USB Device** | **Description** |
| --- | --- |
| THS-U01 | Temperature and Humidity USB sensor, cable 2m (6.5ft) |
| AIR-U01 | Air Flow and Temperature USB sensor, 0.15 to 1.0 m/s [30 to 200 fpm], cable 4m (13ft) |
| AIR-U02 | Air Flow and Temperature USB sensor, 0.5 to 10.0 m/s [100 to 2,000 fpm], cable 4m (13ft) |
| DOOR-01 | Proximity sensor, cable 4m (13ft) - Requires IO8-U01 |
| RL4-U01 | 4-port Relay via USB, cable 3m (10ft) |
| IO8-U01 | 8-port GPIO via USB, cable 3m (10ft) |
| BCON-U01 | Beacon with alarm USB, black base, blue light, cable 3m (10ft) |
| BCON-U05 | Beacon, no alarm USB, black base, clear light, cable 5m (16ft) |
| SMK-U01 | Smoke detector, cable 3m (10ft) - Requires IO8-U01 and RL4-U01 |

## **Supported USB Sensors**

| **USB Device** | **Vendor** |
| --- | --- |
| USB Serial | FTDI, CP2105, CP210X |
| USB KVM | ZPE KVM-U01 - KVM over USB dongle (VGA, USB kb, USB mouse) |
| USB Sensor | ZPE Environmental: THS-U01 - temperature & humidity, Degree Controls F200 - Air Velocity Sensor (paired with TLL-232R-3V3 or TTL-232R-5V converter cable) |
| USB Analog Modem | Zoom, US Robotics |
| USB Cellular Modem | USB620L, USB730L |
| USB 1G Ethernet | Any USB 3.0 Gigabit Ethernet adapter |
| USB SFP Ethernet | Winyao USB1000F USB 3.0 Gigabit Fiber adapter |
| USB WiFi | Wireless Network adapter for Linux (TP-Link TL-WN722N) |
| USB Storage | Any USB flash drive |

These devices utilize Linux drivers supported by the System. Certain driver versions may not work as expected. If any issues occur, contact [support@zpesystems.com](mailto:%20support@zpesystems.com).

## **Supported USB I/O Devices**

| **USB I/O Device** | **Description** | **GPIO Input** | **Analog Input** |
| --- | --- | --- | --- |
| Numato GP80001E | GPIO Module | 8-On/Off | 6-Any |
| Numato USBPOWRL001 | Relay Module | No | 4-Any |
| Delcom USB HID 9040XX | Light Tower | No | No |
| Patlite LR6-USB-W/K | Light Tower | No | No |
| TRH-320 | Humidity and temperature sensors | No | 1 Humidity - % 1 Temperature - ºC |
| Degree Controls F200 | Air temperature and velocity sensors | No | 1 Air Temperature - ºC 1 Air Velocity - m/s |
| Homologated Generic USB I/O Device | All in one | 100-On/Off | 100 generic - any |

## **Additional Supported USB Devices**

| **USB i/O Device** | **GPIO output** | **Relay** | **Light** | **Buzzer** |
| --- | --- | --- | --- | --- |
| Numato GP80001E | UP TO 8 – On, Off | No | No | No |
| Numato USBPOWRL001 | UP TO 4 – On, Off | 2 – On, Off | No | No |
| Delcom USB HID 9040XX | No | No | 3 – On, Off, continuous cycle | 1 – On, Off, continuous cycle |
| Patlite LR6-USB-W/K | No | No | 1 – On, Off, continuous cycle | 1 – On, Off, continuous cycle |
| TRH-320 | No | No | No | No |
| Degree Controls F200 | No | No | No | No |
| Homologated Generic USB I/O Device | 100 – On, Off | 100 – On, Off | 100 – On, Off, continuous cycle | 100 – On, Off, continuous cycle |
| Numato GP80001E | UP TO 8 – On, Off | No | No | No |
| Numato USBPOWRL001 | UP TO 4 – On, Off | 2 – On, Off | No | No |

##