---
title: "Configure Sensor Settings on Nodegrid Device"
slug: "configure-sensor-settings-on-nodegrid-device-7"
updated: 2023-04-13T12:12:01Z
published: 2023-04-13T12:12:01Z
canonical: "docs.zpesystems.com/configure-sensor-settings-on-nodegrid-device-7"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.zpesystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Configure Sensor Settings on Nodegrid Device

To perform these procedures, log into the Nodegrid Device.

## Access sub-tab

1. Go to *Managed Devices :: Devices :: Relay :: Access*. ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679669770586.png)
2. As needed (many of these are optional):
  1. On **Type** drop-down, accept default: **USB_sensor**.
  2. Enter **Address Location**.
  3. Enter **Coordinates (Lat,Lon**).
  4. Click **Icon** (on pop-up, select the preferred icon)
  5. On **Mode** drop-down, select one (Enabled, On-demand, Disabled, Discovered).
3. Click **Save**.

## Management sub-tab

1. Go to *Managed Devices :: Devices :: Relay :: Management*. ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679669878539.png)
2. In the *Monitoring* menu, select **Nominal** checkbox (expands dialog).
  1. Enter **Name**.
  2. On **Type** drop-down, select one. ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679669906272.png)
  3. Enter **Value**.
  4. Enter **Interval (seconds)**.
3. In the *Scripts* menu (if scrips are available): ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679669935357.png)
  1. On **Run on Session Start** drop-down, select a script.
  2. On **Run on Session Stop** drop-down, select a script.
  3. On **Run on Device UP** drop-down, select a script.
  4. On **Run on Device Down** drop-down, select a script.
4. Click **Save**.

## Custom Fields sub-tab

1. Go to *Managed Devices :: Devices :: Relay :: Custom Fields*. ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679669958289.png)
2. To create a custom field, click **Add** (display’s dialog). ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679669999118.png)
  1. Enter **Field Name**.
  2. Enter **Field Value**.
3. Click **Save**.

## Commands sub-tab

1. Go to *Managed Devices :: Devices :: Relay :: Commands*. ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679670023334.png)
2. To create a custom command, click **Add**.
3. In **Command** drop-down select one (Web, Custom Commands).
  1. Select **Web** (displays dialog). ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679670047360.png)Select **Enabled** checkbox.  
Enter **WEB URL**.
  2. Select **Custom Commands** (displays dialog). ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679670082078.png)Select **Enabled** checkbox.  
In **Script** drop-down, select one. Select **Enabled** checkbox. Enter **Command Label**.
4. (Repeat as needed)
5. Click **Save**.

## Sensor Channels sub-tab

The table displays configured sensor channels.

1. Go to *Managed Devices :: Devices :: Relay :: Sensor Channels*. ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679670109967.png)
2. To edit channel details, click on name (displays dialog).
3. Click on **Smoke_Alarm** channel (displays dialog). ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679670138920.png)
  1. Edit **Name** (as needed).
  2. On **Mode** drop-down, accept default: **relay**.
  3. On **Unit** drop-down, accept default: **Off/On**.
4. Click on **Front_Door_Lock** channel (displays dialog). ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679670159480.png)
  1. Edit **Name** (as needed).
  2. On **Mode** drop-down, accept default: **relay**.
  3. On **Unit** drop-down, accept default: **Off/On**.
5. Click on **Rear_Door_Lock** channel (displays dialog). ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679670179577.png)
  1. Edit **Name** (as needed).
  2. On **Mode** drop-down, accept default: **relay**.
  3. On **Unit** drop-down, accept default: **Off/On**.
6. Click on **Relay_cn3**channel (displays dialog). ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679670198632.png)
  1. Edit **Name** (as needed).
  2. On **Mode** drop-down, accept default: **relay**.
  3. On **Unit** drop-down, accept default: **Off/On**.
7. Click **Save**.