---
title: "Configure Sensor Settings on Nodegrid Device"
slug: "configure-sensor-settings-on-nodegrid-device-8"
updated: 2023-04-13T12:18:25Z
published: 2023-04-13T12:18:25Z
canonical: "docs.zpesystems.com/configure-sensor-settings-on-nodegrid-device-8"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.zpesystems.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Configure Sensor Settings on Nodegrid Device

To perform these procedures, log into the Nodegrid Device.

## Access sub-tab

1. Go to *Managed Devices :: Devices :: TemperatureHumidty :: Access*. ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679678042567.png)
2. As needed (many of these are optional):
  1. Enter **Address Location**.
  2. Enter **Coordinates (Lat,Lon**).
  3. Enter **WEB URL**.
  4. Select **Launch URL via HTML5** checkbox.
  5. Select **Enable Hostname Detection** checkbox.
  6. Select **Multisession** checkbox.
  7. Select **Read-Write Multisession** checkbox.
  8. Click **Icon** (on pop-up, select the preferred icon).
  9. On **Mode** drop-down, select one (Enabled, On-demand, Disabled, Discovered).
3. On *Inbound Access* menu:
  1. Select **Skip authentication to access device (NONE authentication)** checkbox.
  2. Enter **Escape Sequence** (default: ^Ec).
  3. Enter **Power Control Key** (default: ^O).
  4. Select **Show Text Information** checkbox.
  5. Select **Enable IP Alias** checkbox (extends dialog). Enter details as needed. ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679678080925.png)Enter **IP Address**.  
On **Interface** drop-down, select one.  
On **Browser Action** drop-down, select one.  
Select **Allow Telnet Protocol** checkbox. Enter **TCP Socket Port** (default: 23).
  6. Select **Enable second IP Alias** checkbox (repeats above).
  7. Select **Allow SSH Protocol** checkbox (extends dialog). Enter **SSH Port**. ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679579635537.png)
  8. Select **Allow Telnet protocol** checkbox (extends dialog). Enter **Telnet Port**. ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679579662452.png)
  9. Select **Allow Binary Socket** checkbox (extends dialog). Enter **TCP Socket Port**. ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679579686681.png)
4. Click **Save**.

## Management sub-tab

1. Go to *Managed Devices :: Devices :: TemperatureHumidty :: Management*.
2. In the *Monitoring* menu:
  1. Select **USB Sensor** checkbox (expands dialog). ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679678398225.png)
  2. On **Template** drop-down, accept default: **usb_sensor**.
  3. Enter **Interval (seconds)**.
3. In *Channel Configuration* menu (assign values as preferred):
4. In *Temperature* menu:
  1. In **Temperature Channel Unit** drop-down, select **Celsius** (Celsius, Fahrenheit, Kelvin).
  2. In **Temperature High Critical Threshold**, enter **30**.
  3. In **Temperature High Warning Threshold**, enter **25**.
  4. In **Temperature Low Warning Threshold**, enter **7**.
  5. In **Temperature Low Critical Threshold**, enter **4**.
5. In *Humidity* menu:
  1. In **Humidity Channel Unit** drop-down, select **Percent**.
  2. In **Humidity High Critical Threshold**, enter **65**.
  3. In **Humidity High Warning Threshold**, enter **60**.
  4. In **Humidity Low Warning Threshold**, enter **35**.
  5. In **Humidity Low Critical Threshold**, enter **30**.
6. In the *Scripts* menu (if scripts are available): ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679678461897.png)
  1. On **Run on Session Start** drop-down, select a script.
  2. On **Run on Session Stop** drop-down, select a script.
  3. On **Run on Device UP** drop-down, select a script.
  4. On **Run on Device Down** drop-down, select a script.
7. Click **Save**.

## Custom Fields sub-tab

1. Go to *Managed Devices :: Devices :: TemperatureHumidty :: Custom Fields*. ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679678481994.png)
2. To create a custom field, click **Add** (display’s dialog). ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679678536570.png)
  1. Enter **Field Name**.
  2. Enter **Field Value**.
3. Click **Save**.

## Commands sub-tab

1. Go to *Managed Devices :: Devices :: TemperatureHumidty :: Commands*. ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679678558948.png)
2. To create a custom command, click **Add**.
3. In **Command** drop-down select one (Web, Custom Commands).
  1. Select **Web** (displays dialog). ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679678913384.png)Select **Enabled** checkbox.  
Enter **WEB URL**.
  2. Select **Custom Commands** (displays dialog). ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679678995494.png)Select **Enabled** checkbox.  
In **Script** drop-down, select one. Select **Enabled** checkbox. Enter **Command Label**.
4. (Repeat as needed)
5. Click **Save**.

## Sensor Channels sub-tab

The table displays configured sensor channels.

1. Go to *Managed Devices :: Devices :: TemperatureHumidty :: Sensor Channels*. ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679679100194.png)
2. To edit channel details, click on name (displays dialog).
3. Click on **Temperature** channel (displays dialog). ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679679133510.png)
  1. Edit **Name** (as needed).
  2. On **Mode** drop-down, accept default: **analog input**.
  3. On **Unit** drop-down, select one (Celsius, Fahrenheit, Kelvin).
4. Click on **Humidity** channel (displays dialog). ![](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/image-1679679232963.png)
  1. Edit **Name** (as needed).
  2. On **Mode** drop-down, accept default: **analog input**.
  3. On **Unit** drop-down, accept default: **Percent**.
5. Click **Save**.