IO8-U01 8-port GPIO

Use this sensor to seamlessly connect real-world devices via USB. This GPIO device hides the complexity of USB. Modules can be connected to the ports on this USB sensor. Seven of the 8 port channels are pre-configured. The last port is available for an additional sensor module. The sensor controls and read status is accessed via CLI, SNMP, Restful APIs. Nodegrid device (Kibana), Nodegrid ZPE Cloud Data Lake.

Hardware:

• GPIO 8-port sensor
• Cable Length 3 meters (10 feet)

Specifications:

Eight TTL compatible GPIO channels:

• Front_Door (Input: Off/On, GPIO0 Input State: Off/On)
• Rear_Door (Input: Off/On, GPIO1 Input State: Off/On)
• Smoke_Alarm (Input: Off/On, GPIO2 Input State: Off/On)
• Electric_Front_Door_Status (Input: Off/On, GPIO3 Input State: Off/On)
• Mechanical_Front_Door_Status (Input: Off/On, GPIO4 Input State: Off/On)
• Electric_Rear_Door_Status (Input: Off/On, GPIO5 Input State: Off/On)
• Mechanical_Rear_Door_Status (Input: Off/On, GPIO6 Input State: Off/On)
• Gpio_cn7 (Output: Off/On, GPIO7 Output State: Off/On)

Sensor Details on ZPE Cloud Data Lake

Sensor details are visible on Data Lake. Go to DASHBOARD :: CHARTS to view active Sensors of ZPE Cloud devices. The view can be filtered by date/time, devices, and other criteria.