--- title: "Nodegrid Bold Services Router - QSG - English" slug: "nodegrid-bold-en" tags: ["Nodegrid Serial Console", "Quick Start Guide", "NSC", "NSCP", "NSC-R", "NSC-S", "NSC-T"] updated: 2024-10-30T05:56:53Z published: 2024-10-30T05:56:53Z canonical: "docs.zpesystems.com/nodegrid-bold-en" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.zpesystems.com/llms.txt > Use this file to discover all available pages before exploring further. # Nodegrid Bold Services Router - QSG - English ## **Quick Start Guide for Nodegrid Bold SR** **Security Warning** *NodegridBold SR provides extensive access to the devices attached to it. Precautions must be taken to avoid compromising your security policies.* From the factory, this equipment is shipped with the following settings: - DHCP, SSHv2, HTTPS – ENABLED - All Serial ports – DISABLED - Ethernet, USB and Serial Console Ports – ENABLED ***Users will be required to create a password the first time they login to the device.*** Note: root access has been disabled for security reasons. Please consult the *Nodegrid User Guide* for more information on security settings. ## **BSR shown** ![BSR.png](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/BSR.png) ### **1 Mount your Bold** For detailed mounting instructions, see the *Nodegrid User Guide* which is available on the Document [Library](https://docs.zpesystems.com/nodegrid/docs). ### **2 Connect to your network** Connect a ZPE-recommended CAT 5e or CAT 6 cable from the 1 GeB port to your network. Connect network devices to the network ports on the Bold. ### **3 Connect serial devices** Using CAT 5e or CAT 6 cables, connect the appropriate serial devices to the serial ports on the *Bold SR*. ### **4 Connect USB devices** Connect supported USB devices to the appropriate ports located on the back of the Bold SR. ### **5 Connect power cable and turn on the Bold SR** Connect the power adapter to the appliance. Press the power switch to power on *Bold SR*. **Note:** All remaining manual setup steps are required the first time you configure your LSR. *For manual downloads and support, visit:* [*www.zpesystems.com/document-library/*](https://zpesystems.com/document-library/) *For further assistance please contact ZPE Technical Support.* [*support@zpesystems.com*](mailto:support@zpesystems.com) ### **6 Connect to the Serial Console port** Using the ZPE’s RJ-45 console adaptor, connect a terminal or workstation to the serial console port on the Bold SR. The Bold SR will be configured using a terminal or terminal emulator with session settings of: 115,200, 8, N and 1, with no flow control. Alternatively, use the VGA port. **Note:** *All remaining manual setup steps are required the first time you configure your Bold SR.* ### **7 Configure network parameters** **NOTE:** *Skip to* ***step 8*** *if you have a DHCP environment. DHCP is the default IP configuration. If no DHCP server is available, please log in to Nodegrid Bold SR via its console port using* ***admin*** *credentials and configure a static IP address using CLI instructions as follows:* ```plaintext [admin@nodegrid/]# cd /settings/network_connections/ETH0 [admin@nodegridETH0]# set ipv4_mode=static [+admin@nodegridETH0]# set ipv4_address=10.0.0.10 [+admin@nodegridETH0]# set ipv4_bitmask=24 [+admin@nodegridETH0]# set ipv4_gateway=10.0.0.1 [+admin@nodegridETH0]# show name: ETH0 type: Ethernet ethernet_interface = eth0 description = connect_automatically = yes set_as_primary_connection = yes enable_lldp = no ipv4_mode = static ipv4_address = 10.0.0.10 ipv4_bitmask = 24 ipv4_gateway = 10.0.0.1 ipv4_dns_server = ipv4_dns_search = ipv4_default_route_metric = 90 ipv4_ignore_obtained_default_gateway = no ipv6_mode = address_auto_configuration ipv6_dns_server = ipv6_dns_search = ipv6_default_route_metric = 90 ipv6_ignore_obtained_default_gateway = no [+admin@nodegridETH0]# commit ``` ### **8 Configure serial, network & USB devices** **Note:** Your Bold will respond over the network at **192.168.160.10** if your DHCP server fails or is unavailable. **Note:** To check your current IP address, connect to the Bold SR console port and hit **Enter** at the login prompt until you see the IP address. To configure the Bold for the first time via Network: a) Open a web browser (HTTP/S) and enter its IP address in the address field. Or start an SSH session to your Bold’s IP address. b) Log in to your Bold as **admin**. c) Set your Nodegrid Bold SR basic configuration: **Step 1 – Security** Security services tab: Select the desired services, cryptographic protocols and cipher suite levels. Click *Save* when finished. **Step 2 - Network** Network settings tab: Set your desired Network and Interfaces parameters. Click *Save* for each submenu. **Step 3 - Ports** Managed Devices tab: Select local serial console port checkboxes and click “Edit.” Set your preferences and click *Save* when finished. **Step 4 - Change Admin Password** At any time, click admin@domain.comin the upper right corner of your screen and click “Change Password” to change your system password. **Congratulations!** Your Nodegrid Bold SR is now configured and ready to accept users and connections to its ports. ### **9 Additional Configuration** **NOTE:** We recommend that you set up a new Administrator account (in *admin* group with full privileges) and use the **new** account instead of the default *admin* account. **Add New Users** Click Security tab, Local Accounts, Add, set options, Save. **Alerts & logging** Set and send alerts by email, SMS, and/or SNMP. **Power** Control network attached PDU power strips and server, network and storage devices. For advanced configuration options, howtos and tips please refer to your *Bold SR User Guide*. ### **10 Get technical updates** To automatically receive future firmware updates and technical information, sign up here: [*www.zpesystems.com/the-loop/*](https://zpesystems.com/the-loop/) --- By installing, copying, or otherwise using this device, you agree to be bound by the terms of the licensing, maintenance and sale agreements set forth on [www.zpesystems.com/docs/legal](http://www.zpesystems.com/docs/legal). If you do not agree to the terms of those agreements, do not install or use the Hardware and/or Software Product(s).