Nodegrid Bold SR

The Nodegrid Bold SR is ideally used as an OOBI-WAN gateway to provide a resilient Out-of-Band connection to remote locations. In this use case, the Bold SR acts as a local OOBI-LAN device to provide a dedicated network for management traffic and co...

To use ZPE Cloud, customers must create an account first. Each account comes with a 90-day trial license. NOTE Each Company can have one ZPE Cloud account. Before creating another account, please check with your Company Admin. ZPE Cloud Ac...

Box Contents The unit is shipped with some accessories: 1 x Power Supply 1 x Set of rack mounting brackets Set of antennas (if the unit was shipped with 5G/4G modem or Wifi) The Bold SR is shipped with one of two default configurations....

To access the Nodegrid device for the first time either connect the device to the Web UI using a browser or connect to the serial console port (using the console cable). Default IP - No DHCP Your Nodegrid Bold SR will respond over the networ...

Upgrade Software from ZPE Cloud Before using the device, upgrade the version. This ensures all the latest features are available with the latest security patches. Administrators should review Release Notes . NOTE The recommended minimum ver...

The device can now be accessed from the ZPE Cloud. Administrators can finalize the configuration on the device's WebUI. Log in to the ZPE Cloud. Go to DASHBOARD :: ACCESS In the table, locate the device. On the far right, click WEB ...

It is recommended to finalize the network and failover configuration first. This ensures the device can use the 4/5G connection as a backup (in case of primary connection failure). This also enables access via ZPE Cloud through the failover connecti...

This section provides an example to enable console connections. Also configures management connections to SSH and WebUI-based devices via the device_console device type and Power Control options through the pdu_XXX device type. Console Connect...

Device connections are available on the Nodegrid WebUI and ZPE Cloud interface. ZPE Cloud Opening a session to a target device in ZPE Cloud does not require end-user access to ZPE Cloud. VPN connection is not required. Nodegrid and ZPE Cloud act a...

Read Sensor Data from Nodegrid UI Go to Access :: Table . Locate the sensor and click on the name. This displays current values. Enable Monitoring in ZPE Cloud In ZPE Cloud, go to APPS :: NODEGRID DATA LAKE icon. The Data Lak...