--- title: "Nodegrid Link Services Router - QSG - English" slug: "nodegrid-link-en-1" tags: ["Nodegrid Serial Console", "Quick Start Guide", "NSC", "NSCP", "NSC-R", "NSC-S", "NSC-T"] updated: 2024-10-30T06:21:06Z published: 2024-10-30T06:21:06Z canonical: "docs.zpesystems.com/nodegrid-link-en-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.zpesystems.com/llms.txt > Use this file to discover all available pages before exploring further. # Nodegrid Link Services Router - QSG - English ## Quick Start Guide for Nodegrid Link SR Security Warning *Nodegrid Link SR (LSR) provides extensive access to the devices attached to it. Precautions must be taken to avoid compromising your security policies.* From the factory, this equipment is shipped with the following settings: - DHCP, SSHv2, HTTPS – ENABLED - Serial – DISABLED - All USB, SFP+ , Ethernet , and switch ports – ENABLED ***Users will be required to create a password the first time they login to the device.*** Note: root access has been disabled for security reasons. Please consult the *Nodegrid User Guide* for more information on security settings. Please review the *LSR* Safety Information before installation. ## LSR shown ![LSR-QSG.png](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/LSR-QSG.png) ### 1 Mount your LSR For detailed mounting instructions, see the *Nodegrid User Guide* which is available on the Document [Library](https://docs.zpesystems.com/nodegrid/docs). ### 2 Connect to your network Connect a ZPE-recommended CAT 5e or CAT 6 cable from the 10/100/1000BaseT port to your network. ### 3 Connect serial devices Using the ZPE’s RJ-45 console adaptor, connect a terminal or workstation with terminal emulator (set to 115200bps, 8, N,1, with no flow control) to the LSR serial console port. ### 4 Connect power cables Connect the power cable to the appliance. ### 5 Turn LSR on Turn on the power switches. **Note:** All remaining manual setup steps are required the first time you configure your LSR. *For manual downloads and support, visit:* [*www.zpesystems.com/document-library/*](https://zpesystems.com/document-library/) *For further assistance please contact ZPE Technical Support.* [*support@zpesystems.com*](mailto:support@zpesystems.com) ### 6 Configure network parameters **NOTE:** *Skip to* ***step 7*** *if you have a DHCP environment. DHCP is the default IP configuration. If no DHCP server is available, please log in to Nodegrid Link SR via its console or HDMI port using* ***admin*** *credentials and configure a static IP address using CLI instructions as follows:* ```plaintext [admin@nodegrid/]# cd /settings/network_connections/ETH0 [admin@nodegridETH0]# set ipv4_mode=static [+admin@nodegridETH0]# set ipv4_address=10.0.0.10 [+admin@nodegridETH0]# set ipv4_bitmask=24 [+admin@nodegridETH0]# set ipv4_gateway=10.0.0.1 [+admin@nodegridETH0]# show name: ETH0 type: Ethernet ethernet_interface = eth0 description = connect_automatically = yes set_as_primary_connection = yes enable_lldp = no ipv4_mode = static ipv4_address = 10.0.0.10 ipv4_bitmask = 24 ipv4_gateway = 10.0.0.1 ipv4_dns_server = ipv4_dns_search = ipv4_default_route_metric = 90 ipv4_ignore_obtained_default_gateway = no ipv6_mode = address_auto_configuration ipv6_dns_server = ipv6_dns_search = ipv6_default_route_metric = 90 ipv6_ignore_obtained_default_gateway = no [+admin@nodegridETH0]# commit ``` ### 7 Configure serial, network & USB devices **Note:** Your LSR will respond over the network at **192.168.160.10** if your DHCP server fails or is unavailable. Note: To check your current IP address, connect to the LSR console port and hit **Enter** at the login prompt until you see the IP address of ETH0 interface. To configure the LSR for the first time via Network: a) Open a web browser (HTTP/S) and enter its IP address in the address field. Or start an SSH session to your LSR’s IP address. b) Log in to your LSR as **admin**. c) Set your LSR basic configuration: - **Security** - ***Security, Services page:*** Select the desired services and Ports, cryptographic protocols and cipher suite levels. Click *Save* when finished. *Authentication* page: add your Remote Authentication servers (AD, LDAP, Tacacs+, Radius and/or Kerberos). ***Authorization page:*** create users groups, set profiles and assign devices - **Network** - ***Network Settings*** tab: Set your desired Network parameters. Click *Save* for each submenu. ***Network Connections*** tab: Set your desired Network Interfaces parameters. Click *Save* for each submenu. - **Serial and USB ports** - ***Managed Devices*** tab: Enable and configure your desired serial and USB ports. - Change Admin Password At any time, click [admin@domain.com](/guides/docs/nodegrid-link-en-1#) in the upper right corner of your screen and click “Change Password” to change your system password. **Congratulations**! Your Nodegrid Link SR is now configured and ready to accept users and connections to its ports and interfaces. ### 8 Additional Configuration **NOTE:** We recommend that you set up a **new** Administrator account (in *admin* group with full privileges) and use the new account instead of the default *admin* account. **Add New Users** Click Security tab, Local Accounts, Add, set options, *Save*. **Alerts & logging** Set and send alerts by email, SMS, and/or SNMP. **Power** Control network attached PDU power strips and server, network and storage devices. For advanced configuration options, howtos and tips please refer to your *Nodegrid Link SR User Guide*. ### 9 Get technical updates To automatically receive future firmware updates and technical information, sign up here: [*www.zpesystems.com/the-loop/*](https://zpesystems.com/the-loop/) --- By installing, copying, or otherwise using this device, you agree to be bound by the terms of the licensing, maintenance and sale agreements set forth on [www.zpesystems.com/docs/legal](http://www.zpesystems.com/docs/legal). If you do not agree to the terms of those agreements, do not install or use the Hardware and/or Software Product(s).