--- title: "Nodegrid Mini SR - QSG- English" slug: "nodegrid-mini-sr-en" updated: 2024-07-19T04:57:24Z published: 2024-07-19T04:57:24Z canonical: "docs.zpesystems.com/nodegrid-mini-sr-en" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.zpesystems.com/llms.txt > Use this file to discover all available pages before exploring further. # Nodegrid Mini SR - QSG- English ## Quick Start Guide for Nodegrid Mini SR Security Warning *The Nodegrid Mini SR (MSR) provides access to the internet for devices attached to the LAN port. As a result, care must be taken to avoid compromising your security policies.* From the factory, this equipment is shipped with the following settings: - DHCP – ENABLED in ETH1(WAN) port - DHCP Server – ENABLED in ETH2(LAN) port - USB, ETH1, ETH2 – ENABLED - Firewall – ENABLED in ETH1 port - One default user with passwords: – **admin** / **admin** ***ZPE requires changing the default passwords of admin at the first login, as well as carefully configuring security settings immediately after initial setup.*** Please consult the MSR User Guide for more information on security settings. Please consult the MSR Safety Information before installation. ## MSR shown ![MSR.png](https://cdn.document360.io/763c5fb1-b9af-4ccd-9ad6-cf28ae4cd5a3/Images/Documentation/MSR.png) ### 1 Desktop, wall mount, or DIN mount your MSR *For detailed DIN-rail mounting and wall mounting instructions, see the Nodegrid Manual.* ### 2 Connect to your network Connect a ZPE-recommended CAT 5e or CAT 6 cable from the ETH1 port to your network. ### 3 Connect to your device Connect a ZPE-recommended CAT 5e or CAT 6 cable from the ETH2 port to your network device. ### 4 Connect power adaptor to turn MSR on Connect the power cord to the appliance. Power will automatically turn on. ***Note:*** *All remaining manual setup steps are required the first time you configure your MSR.* *For manual downloads and support, visit:* [*www.zpesystems.com/document-library/*](https://zpesystems.com/document-library/) *For further assistance please contact ZPE Technical Support.* [*support@zpesystems.com*](mailto:support@zpesystems.com) ### 5 Configure network parameters **NOTE:** *Skip to* ***step 6*** *if you have a DHCP environment. DHCP is the default IP configuration. If no DHCP server is available, please log in to Nodegrid Mini SR via its console port using* ***admin*** *credentials and configure a static IP address using CLI instructions as follows:* ```plaintext [admin@nodegrid /]# cd settings/network_connections/ETH1/ [admin@nodegrid ETH1]# set ipv4_mode=static [admin@nodegrid ETH1]# set ipv4_address=10.0.0.10 [admin@nodegrid ETH1]# set ipv4_bitmask=24 [admin@nodegrid ETH1]# set ipv4_gateway=10.0.0.1 [admin@nodegrid ETH1]# show name: ETH1 type: ethernet ethernet_interface = eth1 connect_automatically = yes set_as_primary_connection = yes enable_lldp = no ipv4_mode = static ipv4_address = 10.0.0.10 ipv4_bitmask = 24 ipv4_gateway = 10.0.0.1 ipv4_dns_server = ipv4_dns_search = ipv6_mode = address_auto_configuration ipv6_dns_server = ipv6_dns_search = [admin@nodegrid ETH1]# commit [admin@nodegrid ETH1]# exit ``` Login as root with default credentials and change the root password. ### 6 Configure network & USB devices **NOTE:** To check your current IP address, connect to the MSR console port and hit Enter at the login prompt until you see the IP address of ETH1 interface. To configure the MSR for the first time via Network: a) Connect laptop to the ETH2 port via CAT 5e/6 cable. The laptop will receive IP address in the 192.168.10.0/24 network. b) Open browser on the laptop to connect to 192.168.10.1 c) Log in to your MSR as **admin**. d) Set your MSR basic configuration: - **Security** - ***Security, Services*** page: Select the desired services and Ports, cryptographic protocols and cipher suite levels. Click *Save* when finished. - **Authentication** page: add your Remote Authentication servers (AD, LDAP, Tacacs+, Radius and/or Kerberos). Click *Save* when finished. - **Authorization** page: create users groups, set profiles and assign devices. Click *Save* when finished. - **Network** - ***Network Settings*** tab: Set your desired Network parameters. Click *Save* for each submenu. - ***Network Connections*** tab: Set your desired Network Interfaces parameters. Click *Save* for each submenu. - **USB ports** - **Managed Devices** tab: Enable and configure your desired USB ports. - **Change Admin Password** At any time, click [admin@domain.com](/guides/docs/nodegrid-mini-sr-en#) in the upper right corner of your screen and click “Change Password” to change your system password. Click *Save* when finished. **Congratulations!** Your Nodegrid Mini SR is now configured and ready to accept users and connections to its ports and interfaces. ### 7 Additional Configuration **NOTE:** We recommend that you set up a **new** Administrator account (in admin group with full privileges) and use the new account instead of the default admin account. **Add New Users** Click Security tab, Local Accounts, Add, set options, *Save*. **Alerts & logging** Set and send alerts by email, SMS, and/or SNMP. **Power** Control network attached PDU power strips and server, network and storage devices. For advanced configuration options, how-tos and tips please refer to your *Nodegrid Mini SR User Guide*. ### 8 Get technical updates To automatically receive future firmware updates and technical information, sign up here: [*www.zpesystems.com/the-loop/*](https://zpesystems.com/the-loop/) --- By installing, copying, or otherwise using this device, you agree to be bound by the terms of the licensing, maintenance and sale agreements set forth on [www.zpesystems.com/docs/legal](http://www.zpesystems.com/docs/legal). If you do not agree to the terms of those agreements, do not install or use the Hardware and/or Software Product(s).