Perform Managed Devices Port Configurations

Updated on 06 May 2024
2 Minutes to read

Print
Dark
Light
PDF

Article summary

Did you find this summary helpful?

Thank you for your feedback

Set your desired port to Enable/Disable and configure the port settings. For configuration, navigate to Managed Devices:: Devices. For information on the configuration steps, refer Devices section. Your Nodegrid Serial Console Plus is now configured and ready to accept users and connections to its ports and interfaces.

Configure Device Management

This section provides the following examples to enable console connections and rack PDU connections. It configures management connections to SSH and WebUI-based devices via the device_console device type and Power Control options through the pdu_XXX device type.

RS-232/USB
Rack PDU Connections

Example 1: Console Connection (RS-232/USB)

1. On the Nodegrid WebUI, go to Managed Devices::Devices.
nodegrid-managed_devices-devices

2. Select the appropriate serial port (ttyS1 for port 1) and click Rename
nodegrid-managed_devices-rename

3. Enter a new port name (for example, Fortinet-Console) and click Save.

4. On the table, click the renamed port ttyS1 (Fortinet-Console) (opens dialog).

5. Configure the port settings:

Setting	Value	Description
Baud Rate	Auto	Select the baud rate as Auto so that the managed device port can establish optimal communication with the Nodegrid device. Selecting an Auto baud rate removes the necessity of manually configuring the baud rate for individual devices.
Mode	Enabled	Select the Enabled mode to redirect the URL to a web server and offer the same behavior as the HTML5 frame. When enabled, this option also enables users to view the managed device Web interface in full-screen mode instead of a windowed frame.
Icon	Icon	Select a device icon.

Click Save

WebUI or SSH-based Connections

Go to Managed Devices :: Devices.
Click Add (displays dialog).
Configure the new managed device with these settings:

Setting	Value	Description
Name	Fortigate-Web	A valid device name.
Type	device_console	Select from drop-down list (default device_console). Provides SSH and Web access.
IP Address	IP-ADDRESS	IP address of the management interface.
username	username	Username for the SSH connection.
password	password	Password for the SSH connection (optional).
Mode	On-Demand	This performs no active device state checks.
Enable device state detection based on network traffic (icmp)	Enabled	Enables device state checks via ICMP.
Icon	Icon	Select a device icon.

nodegrid_managed_devices-device_console-basic

Click Save

Example 2: Rack PDU Connections

Go to Managed Devices :: Devices.
Click Add (displays dialog).
Configure the new managed device with these settings:

Setting	Value	Commend
Name	Raritan_PDU	Provide a valid device name.
Type	pdu_raritan	Select a valid PDU type from the list. (provides SSH, Web access and Outlet control via SNMP).
IP Address	IP-ADDRESS	IP address of the management interface.
username	username	Username for the SSH connection.
password	password	Password for the SSH connection (optional).
Mode	On-Demand	On-demand mode performs no active device state checks.
Enable device state detection based on network traffic (icmp)	Enabled	Enables device state checks via ICMP.
Icon	Icon	Select a device icon.

Click Save.
On the table, click the created device Raritan_PDU.
On Management tab, configure the following settings:

Setting	Value	Commend
Protocol: SNMP	Enabled	Enables SNMP protocol.
SNMP Version	2c	Select the correct SNMP version (1/2c/3).
Community	private	Provides SNMP community with read/write access to device.

Click Save.
On Commands tab, click on Outlet.
On Protocol drop-down, select SNMP.

Was this article helpful?

What's Next

Connect to Managed Devices

Table of contents