Unbox and Connection
- 29 Aug 2024
- 1 Minute to read
- Print
- DarkLight
- PDF
Unbox and Connection
- Updated on 29 Aug 2024
- 1 Minute to read
- Print
- DarkLight
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
Unbox the Device
The Nodegrid Net Services Router device has two power variants: Dual AC and Dual DC. Each variant has a distinct set of components and accessories tailored to its specific power configuration.
List of Components and Accessories
The following tables provide the list of accessories delivered in the box for these two variants:
Dual DC
Component | Included in the Box | Quantity | Comments |
NSR | Yes | 1 | |
Rack Mount Ears and Screws | Yes | 2 | |
Console Cable and Adapter | Yes | 1 | |
DC Cables (4m) | No | 2 | One side terminated with a terminal ring and the other end terminated appropriately for the available power supply. |
Screwdriver | No | 1 | Philips size #2 |
Cage Nuts | No | 8 | |
Lacing Bars | No | 1 | |
Velcro Strips | No | 2+ |
Dual AC
Component | Included in the Box | Quantity | Comments |
NSR | Yes | 1 | |
Rack Mount Ears and Screws | Yes | 2 | |
Console Cable and Adapter | Yes | 1 | |
C13 AC Cables | No | 1-2 | For SAC units a single cable is required, for DAC 2 cables are required. The cables used should be either C13 to C14 or C13 to the local power socket |
Screwdriver | No | 1 | Philips size #2 |
Cage Nuts | No | 8 | |
Lacing Bars | No | 1 | |
Velcro Strips | No | 2+ |
Connect the Nodegrid Device
Connect the Nodegrid device to an existing router. Connect the management interfaces via Dual SFP+ or dual Ethernet ports or console connection. After the devices are connected, the device can be powered on.
- Connect ETH0 to an existing router or firewall. The device gets an IP address via DHCP and is accessible via that IP address on the local network.
- Connect any IP-based management interface to one of the available network ports (Dual SFP+ and dual Ethernet ports).
- Connect the console management connection to any console ports.
- (Optional) Connect the 4/5G antennas to the unit.
Was this article helpful?