View Sensor Readings on the Nodegrid Device

  • Updated on Apr 13, 2023
  • Published on Apr 13, 2023
  • 1 minute(s) read
Prev Next

There are two ways to see current sensor readings: Sensor Status or USB Sensors.

Sensor Status (Access tab)

  1. Go to Access :: Table. 
  2. In the table Name column, click on Gpio (displays pop-up dialog). 

USB Sensors (Tracking tab)

To view current USB sensor readings:

  1. Go to Tracking ::HW Monitor :: USB Sensors. 
  2. On the table review the sensor’s current readings.