WebUI Procedure
- Use admin login to device’s Nodegrid Platform.
- Go to Network :: Connections.
- Review assigned IP addresses (save for later use).
CLI Procedure
- Log into device as admin.
- Enter:
show /settings/network_connections/
Example output:
[admin@nodegrid /]# show /settings/network_connections/
name status type interface carrier state ipv4 address ipv6 address mac address description
========== ========== ======== ========== ============= ================= =========================== ================= ===========
BACKPLANE0 connected ethernet eth0 up 192.168.10.252/24 fe80 :: 290:fbff:fe5b:72bc/64 e4:1a:2c:5b:72:bc ETH0 connected ethernet backplane0 up 192.168.29.3/24 fe80 :: 290:fbff:fe5b:72bd/64 e4:1a:2c:5b:72:bd
hotspot not active WiFi down