Nodegrid Serial Console - R Series
    • 18 Apr 2023
    • 2 Minutes to read
    • Dark
      Light
    • PDF

    Nodegrid Serial Console - R Series

    • Dark
      Light
    • PDF

    Article summary

    The Nodegrid Serial Console (R Series) fits into major hardware environments like Cisco, Arista, Dell, Palo Alto Networks, and Juniper. The R Series Serial Consoles are perfect for retrofits and to upgrade rack standards of existing builds.

    Features include:

    • For Cisco Pin-out Devices
    • 16/32/48/96 Serial Ports
    • 1U 19" Rack Standard Unit
    • Single AC, Dual AC, and Dual DC

    Nodegrid Serial Console - R Series Hardware Specifications

    Item

    Description

    CPU

    Intel Atom x86_64 dual core @ 1.75 GHz CPU

    Memory & Storage

    4 GB of DDR3 DRAM
    32 GB mSATA SSD

    Interfaces

    16, 32, 48, 96 RS-232 serial ports on RJ45 @ 230,400 bps max/port.
    2 Gigabit (10/100/1000BT) Ethernet interfaces on RJ45 or optionally 2 SFP+ 1/2.5/10GB compatible
    1 RS-232 serial console port on RJ45
    1 USB 3.0 Host and 2 USB 2.0 Hosts on Type A connector
    1 HDMI output port

    Power

    40V-63 VDC dual power input (redundant)
    Power consumption 45 W typical
    Single or Dual AC: 100-240 VAC, 50/60 Hz

    Physical

    Front-Rear mounting brackets
    Size (L x W x H): 443 x 312 x 43 mm (17.4 x 12.3 x 1.7 in), 1U
    Weight: 4.9 kg (10.8 lb), depending on options
    Shipping weight: 9.5 kg (20.9 lb)
    Shipping (L x W x H): 600 x 440 x 210 mm (23.6 x 17.3 x 8.3 in)

    Environmental

    Operation: 0 to 50° C (32 to 122° F), 5-95% RH, non-cond.
    Storage: -20 to 67° C (-4 to 153° F), 5-95% RH, non-cond.

    Nodegrid Serial Console - R Series Front Interfaces

    Port

    Description

    HDMI

    HDMI Interface

    USB

    2 USB 2.0 Port

    PWR

    Power LED Green:· Solid - normal,· Off - power is off

    SYS

    System LED Green:· Blinking – normal, Fast Blink - RST button Acknowledgment, Off or Solid - no activity

    RST

    Reset button:<3s system reset,>10s configuration factory reset and system reset

    Nodegrid Serial Console - R Series Rear Interfaces

    Port

    Description

    Power

    Single or Dual Power Sockets

    Serial

    Serial Interfaces:
    Left/Orange DCD/DTR – On (port open and/or cable connected), Off (not ready)
    Right/Green RX/T- Blinking (data activity), Off (no activity)

    ETH0/SFP0

    Network Interface
    Copper:·Left/Green – Blinking (data activity), Solid (ready), Off (no link/cable disconnected/Ethernet fault)
    Right/Green (1000Base-T link speed), Right/Orange (100BaseT link speed), Right/Off (no link/cable disconnected/Ethernet fault)
    SFP 1Gb/10Gb:·Left/Green – Blinking (data activity), Solid (ready), Off (no link/cable disconnected/Ethernet fault)
    Right/Green (10Gb link speed),·Right/Orange (1Gb link speed),·Right/Off (no link/cable disconnected/Ethernet fault)

    ETH1/SFP1

    Network Interface
    Copper:·Left/Green – Blinking (data activity), Solid (ready), Off:(no link/cable disconnected/Ethernet fault)
    Right/Green (1000Base-T link speed), Right/Orange (100BaseT link speed), Right/Off (no link/cable disconnected/Ethernet fault)
    SFP 1Gb/10Gb:·Left/Green – Blinking (data activity), Solid (ready), Off (no link/cable disconnected/Ethernet fault)
    Right/Green (10Gb link speed), Right/Orange (1Gb link speed), Right/Off (no link/cable disconnected/Ethernet fault)

    Console

    Console MGMT Interface
    Left/Orange (LED Power Failure), Blinking (Power supply failure/off - for dual power supply models), Off (normal)
    Right/Green (LED System Activity) – Blinking (normal), Off or Solid (no activity)

    USB

    USB 3.0



    Was this article helpful?

    ESC

    Eddy AI, facilitating knowledge discovery through conversational intelligence