The Nodegrid Serial Console (S Series) is designed to fit modern and legacy mixed environment. With auto-sensing ports, the S Series Console Servers can be used within any environment with straight-through cables or legacy adapters.
Features include:
Auto-Switching (Cisco or Legacy Pin-out)
16/32/48/96 Serial Ports
Additional USB ports
Factory upgradeable CPU and RAM
1U 19" Rack Standard Unit
Single AC, Dual AC, and Dual DC
Fan options
Nodegrid Serial Console - S Series Hardware Specifications
Item
Description
CPU
Intel x86_64 dual core CPU
Memory & Storage
4 GB of DDR3 DRAM 32 GB mSATA SSD
Interfaces
16, 32, 48, 96 RS-232 serial ports on RJ45 @ 230,400 bps max/port 2 Gb (10/100/1000BT) Ethernet interfaces on RJ45 or (optional) 2 SFP+ 1/2.5/10GB compatible 1 RS-232 serial console port on RJ45 1 USB 3.0 Host and 2 USB 2.0 Hosts on Type A connector 1 HDMI output port
Power
40V-63 VDC dual power input (redundant) Power consumption 45 W typical Single or Dual AC: 100-240 VAC, 50/60 Hz
Physical
Front-Rear mounting brackets Size (L x W x H): 443 x 312 x 43 mm (17.4 x 12.3 x 1.7 in), 1U Weight: 4.9 kg (10.8 lb), depending on options Shipping weight: 7.65 kg (17 lb) Shipping (L x W x H): 600 x 440 x 210 mm (23.6 x 17.3 x 8.3 in) F: front-to-back or back-to-front fans (Swappable) B: no fans
Environmental
Operation: 0 to 50° C (32 to 122° F), 5-95% RH, non-cond. Storage: -20 to 67° C (-4 to 153° F), 5-95% RH, non-cond.
Nodegrid Serial Console - S Series Front Interfaces (F: with fan)
Nodegrid Serial Console - S Series Front Interfaces (B: without fan)
Port
Description
HDMI
HDMI Interface
USB
USB 2.0 Port
PWR
Power LED Green:·Solid - normal,· Off - power is off
SYS
System LED Green:· Blinking – normal,· Fast Blink - RST button Acknowledgment,· Off or Solid - no activity
RST
Reset button: <3s system reset,>10s configuration factory reset and system reset
FAN
Fan options: F (with fan), B (without fan)
USB
1 USB 2.0 Port, 12 USB 1.1 Ports
Nodegrid Serial Console - S Series Rear Interfaces
Port
Description
Power
Single or Dual Power Sockets
Serial
Serial Interfaces: Left/Orange DCD/DTR – On (port open and/or cable connected), Off (not ready) Right/Green RX/T- Blinking (data activity), Off (no activity)
ETH0/SFP0
Network Interface Copper:·Left/Green: Blinking (data activity), Solid (ready), Off (no link/cable disconnected Ethernet fault:· Right/Green (1000Base-T link speed), Right/Orange (100BaseT link speed). Right/Off (no link/cable disconnected/Ethernet fault) SFP 1Gb/10Gb:·Left/Green – Blinking (data activity), Solid (ready), Off (no link/cable disconnected/Ethernet fault) Right/Green - 10Gb link speed:·Right/Orange (1Gb link speed),Right/Off (no link/cable disconnected/Ethernet fault)
ETH1/SFP1
Network Interface Copper:·Left/Green: Blinking (data activity), Solid (ready), Off (no link/cable disconnected/Ethernet fault) Right/Green (1000Base-T link speed),·Right/Orange (100BaseT link speed),·Right/Off (no link/cable disconnected/Ethernet fault) SFP 1Gb/10Gb:·Left/Green: Blinking (data activity), Solid (ready), Off (no link/cable disconnected/Ethernet fault) Right/Green (10Gb link speed),·Right/Orange (1Gb link speed),·Right/Off (no link/cable disconnected/Ethernet fault)
Console
Console MGMT Interface Left/Orange (LED Power Failure), Blinking (Power supply failure/off - for dual power supply models), Off (normal) Right/Green (LED System Activity) – Blinking (normal), Off or Solid (no activity)
USB
1 USB 3.0
Was this article helpful?
Thank you for your feedback! Our team will get back to you