9. Sensors

9.1 Read Sensor Data from Nodegrid UI

1. Go to Access :: Table.
   

2. Locate the sensor and click on the name. This displays current values.
   

9.2 Enable Monitoring in ZPE Cloud

1. In ZPE Cloud, go to APPS :: NODEGRID DATA LAKE icon.
   

2. The Data Lake Dashboard displays. When configured, current sensor data will be displayed here.

3. To enable sensor monitoring, go to DATA LAKE :: DEVICES.
   

4. Select the device and click ENABLE MONITORING.

5. A monitoring profile is pushed to the device, and starts sending the data to Data Lake.

6. To change thresholds, select the device and click CONFIGURE THRESHOLDS. Make changes as needed.
   

7. Click SAVE

8. Wait 5-10 minutes for the first data to be collected, then go to the NODEGRID DATA LAKE DASHBOARD.