DOOR-U01 Proximety Sensor

Use this proximity sensor to ensure rack doors are in the proper position. Does not require another power source. Simple to install with adhesives or hardware. This hermetically sealed, magnetically operated sensor works through wood, plastic, and other non-ferrous materials, with contacts that function even after optical and other technologies fail due to contamination. The sensor must be connected to the GPIO-U01 port. The sensor controls and read status is accessed via CLI, SNMP, Restful APIs. Nodegrid device (Kibana), Nodegrid ZPE Cloud Data Lake.

Hardware:

• Sensor
• Cable: 4 Meters (13 feet)

Specifications:

• Probe operating range: -40°C to 70°C
• DOOR ports:
  • Front_Door (Input: Off/On, GPIO0 Input State: Off/On)
  • Rear_Door (Input: Off/On, GPIO1 Input State: Off/On)
  • Electric_Front_Door_Status (Input: Off/On, GPIO3 Input State: Off/On)
  • Mechanical_Front_Door_Status (Input: Off/On, GPIO4 Input State: Off/On)
  • Electric_Rear_Door_Status (Input: Off/On, GPIO5 Input State: Off/On)
  • Mechanical_Rear_Door_Status (Input: Off/On, GPIO6 Input State: Off/On)

Sensor Details on ZPE Cloud Data Lake

Sensor details are visible on Data Lake. Go to DASHBOARD :: CHARTS to view active Sensors of ZPE Cloud devices. The view can be filtered by date/time, devices, and other criteria.