View Sensor Readings on the Nodegrid Device

There are two ways to see current sensor readings: Sensor Status or USB Sensors.

Sensor Status (Access tab)

1. Go to Access :: Table. 
2. In the table Name column, click on SignalTower_Alarm (displays pop-up dialog). 

There are options to select individual actions. Select checkbox and click appropriate button.

• Sensor Status
• Turn On
• Turn Off
• Continuous Cycle

USB Sensors (Tracking tab)

To view current USB sensor readings:

1. Go to Tracking ::HW Monitor :: USB Sensors. 
2. On the table review the sensor’s current values.