View Sensor Readings on the Nodegrid Device

There are two ways to see current sensor readings: Sensor Status or USB Sensors.

Sensor Status (Access tab)

1. Go to Access :: Table. 
2. In the table Name column, click on Gpio (displays pop-up dialog). 
3. Review details on: Smoke_Alarm (Input: Off/On, GPIO2 Input State: Off/On).

There are options to set smoke detector sensor status conditions. Select Smoke_Alarm checkbox and click appropriate button. 

• Sensors Status
• Turn On
• Turn Off

USB Sensors (Tracking tab)

To view current USB sensor readings:

1. Go to Tracking :: HW Monitor :: USB Sensors. 
2. On the table review the sensor’s current readings.