ZPE Cloud Release Notes
    • 03 Oct 2024
    • 36 Minutes to read
    • Dark
      Light
    • PDF

    ZPE Cloud Release Notes

    • Dark
      Light
    • PDF

    Article summary

    Version 2.39.2

    Release: October 7th, 2024

    Enhancements

    • New SKUs (licenses) have been added, offering subscription plans for 1 year, 2 years, 3 years, or 5 years. Where, each plan allows an organization to use the license on up to five devices throughout the selected subscription period.

    Version 2.39.0

    Release: September 23rd, 2024

    New Features

    • New icons have been added for  Sites checkbox and Devices  under Dashboard Map for easy identification.

    • In Sites :: General :: Add, a new option, Show devices in the same location as the site has been introduced, allowing devices to appear on the map at the same location as the site.  

    • In Sites :: General, two new buttons, ASSOCIATE WITH SITE and DISASSOCIATE WITH SITE, have been added to associate or remove all devices linked to a site respectively.

    Enhancements

    • Added an error message in version 6.0.10 for devices when attempting to decode broken modem data.

    • In Devices::Enrolled, Device Details, and SDWAN::Device Details, the field IP Address has been renamed to IPv4 Address and added support to new field IPv6. These fields show the IP addresses of the Nodegrid device network interface used to connect to the ZPE Cloud.

    Security Fixes

    • Fixed CVE GHSA-h5c8-rqwp-cp95.

    • Fixed CVE GHSA-h75v-3vvj-5mfj.

    Fixed Issues

    • Fixed the issue where opening the user details page showed error when fetching user information.

    • Fixed the issue that prevented users from selecting all available dates and times in the calendar.

    • Fixed the issue where some emails were not being sent after configuring a custom SMTP server and then reverting to the default server in Settings :: Notifications :: Email.

    • Fixed the issue that displayed an incorrect error message when switching organizations.

    • Fixed the issue where user types were mismatched when downloading users.

    • Fixed the behavior of the RELOAD button on the DEVICES page, which was only updating the main table.

    • Fixed the issue where the Delete button was not greyed out, not indicating to the users that a delete operation was in progress.

    • Fixed the issue that prevented saving the user session timeout.

    • Fixed the issue where the job status was displayed incorrectly.

    • Fixed the issue to display toast messages when the username exceeds 30 characters or the last name exceeds 150 characters.

    • Fixed the issue that showed a failed message when applying profile configuration.

    • Fixed the issue where sorting was not working properly on the devices pages.

    • Fixed the issue where the Address field in Add New site did not work for most of the addresses.

    • Fixed  issue where the App should inform users when incorrect app license was used.

    ZPE Cloud Infrastructure - Global IP Change

    Release: September 13th, 2024

    We have expanded the ZPE Cloud infrastructure to enhance its capacity and efficiency. As part of this upgrade, we are updating our IP addresses. This change may affect users who have allowed list of ZPE Cloud IPs in their firewall for internal-to-external communication.

    ACTION REQUIRED:

    If you have ZPE Cloud IPs in your allowed list of IPs, update your allow-list by adding the new IP addresses found at the location Getting Started with ZPE Cloud.

    Ensure all new IP addresses are added to your allow-list by Friday, September 13th, 2024. After this date, only the new IPs will remain functional.

    NOTE

    If you do not use an IP allow-list to block internal-to-external communication, no action is needed.

    For further information, refer to the article https://support.zpesystems.com/portal/en/kb/articles/zpe-cloud-access.

    Version 2.38.1

    Release: August 26th,2024

    Fixed Issues

    • Fixed the issue wherein the checkbox Enable Device Enrollment remained enabled after logging into the ZPE Cloud using SSO.

    • Fixed the issue that was preventing Change User Type to Local dialog box from closing after confirmation.

    • Fixed some e-mails not being sent after configuring a custom SMTP and rolling it back to ZPE Default Server on SETTINGS:: NOTIFICATIONS :: EMAIL.

    • Fixed the issue where a blank screen was displayed on the Device Details page after clicking on a device hostname.

    Version 2.38.0

    Release: August 6th, 2024

    Fixed Issues

    • Fixed Single Sign-On access on Nodegrid through Remote Access.

    • Fixed the issue that prevented users with Operator permission to be redirect from DASHBOARD :: ACCESS to DEVICES Pages details.

    • Fixed the issue that occasionally caused the device status to display incorrectly.

    • Fixed the issue that caused the Device Details page to go blank.

    • Fixed the issue that prevented the button Enroll to On-Premises from showing up on Devices :: Available Tab.

    • Fixed the issue that prevented the Change User Type to Local dialog from closing after confirmation.

    • Fixed the issue where the Enable Device Enrollment checkbox was unchecked in SETTINGS :: CLOUD :: ENROLLMENT.

    • Fixed the issue where clicking on Total Sites in the Map view showed 404 error. The site filter is disabled for group admin and users.

    • Fixed the issue where company information was not being saved.

    • Removed notification icon from header for USER and OPERATOR permission.

    • Fixed API call to /ack-alerts, where a invalid input would return a server error (500) instead of bad request (400).

    • Fixed the issue in the API to create profile, when calling it without informing the type of the profile.

    • Fixed the issue where the Mask button was missing under Tracking::Log page.

    • Fixed the issue where the search field under Logs::Security did not return results based on the filtered data.

    • Fixed the error that was logging out user when changing organizations.

    • Fixed the issue where devices were not resynchronized correctly when a large number of devices were connected to the ZPE Cloud.

    • Updated the Palo Alto Prisma app to prevent the log explorer from showing incorrect error 500.

    • Fixed the issue where some of the mandatory fields such as users' first name and last name were not shown causing errors.

    • Fixed the issue where editing user details at the API level under Settings::Account caused error 500.

    • Fixed the issue where USER and OPERATOR could not access some pages on ZPE Cloud.

    • Fixed the message displayed when installing an already installed app to correctly indicate that the app is already installed.

    • Fixed the issue with API endpoint "/device/<device_id>/enroll" returning error 500.

    • Fixed the issue where dashboard maps could not load if some concurrency operation related to devices or sites happened.

    • Fixed the issue where device status showed online instead of failover, when the device gets back online with failover interface.

    • Fixed the issue where the Sign Up button remained enabled after being pressed once. The button is now disabled during the signing process.

    • Fixed the issue where a group deleted by one user and simultaneously selected as the default group by another user caused the second user not to have a default group. The behavior is now updated to show error 422, indicating that the group has been deleted.

    • Fixed the issue where clicking on the user account creation momentarily displayed an incorrect page before opening the correct one.

    Version 2.37.1

    Release: July 15th, 2024

    Fixed Issues

    • Fixed issue that was blocking creation of custom fields with same name for different scopes.

    • Fixed issue that was causing Device Details page to go blank sometimes.

    • Fixed issue that was preventing button Enroll to On-Premises from showing up on Devices :: Available tab.

    Version 2.37.0

    Release: July 1st, 2024

    Enhancements

    • To enhance security services, a refresh token endpoint (API) is integrated allowing the endpoints to request a new access token using a refresh token when the current token expires.

    • Added a new header to managed devices in the dashboard access page, and improved the page responsiveness to different sizes.

    Fixed Issues

    • Fixed an issue that was causing the Sender Email to be always the default e-mail sender for ZPE Cloud (no-reply@mg.zpecloud.com for US, no-reply@mg.zpecloud.eu for EU).

    • Fixed the issue with the Request Subscription form where the description text was not fully displayed.

    • Fixed the issue where a device gets an error when moved from enrolled to available tabs and vice versa. However, the device was successfully moved to respective tabs.

    • Fixed the issue where the remote access to the device showed 500 error if there was no Nodegrid version for the device. It now shows the message Device version not found.

    • Fixed the issue that was not allowing login into ZPE Cloud through SSO credentials.

    • Fixed the issue where Group:: Device was not showing pagination correctly.

    • Improved error message and added status code 400 for applying profiles to Groups.

    • Fixed switch organization for Remote User (logged using an SSO Provider).

    • Fixed UI issue in Dashboard::Cellular Data Graph showing wrong data unit in Y axis.

    • Fixed the issue with the page not reloading when saving information after updating the account information.

    • Fixed the issue where the NSR Slots section is being wrongly displayed if the device has Mobile data to be shown.

    Version 2.36.1

    Release: May 30, 2024

    Fixed Issues

    • Fixed the issue that caused backup list to display a blank screen for devices that were transferred from one company to another.

    Version 2.36.0

    Release: May 20, 2024

    Enhancements

    • When users are unable to launch a remote session of the device via Web or Console, an error message is now introduced to indicate that remote access is not enabled.

    • When users enter a weak password an error message is displayed to the users about the strong password requirements (instead of a generic message).

    • When there is an issue activating or deactivating Datalake App an error message is now shown to indicate the issue.

    Fixed Issues

    • Fixed event logging issue caused when enabling On-Premise enable / disable configuration.

    • Fixed the issue that was preventing the saving of email configuration from ZPE default server to SMTP.

    • Fixed the Schedule page indentation issue under Profiles :: Jobs.

    • Fixed Dashboard :: Access page becoming blank when showing manage device with icon OCP.

    • Fixed the issue where login screen was displayed to the users when accessing Extended Storage App.

    • Fixed the issue that was preventing users to change their password.

    • Fixed error that was preventing to open Operation :: Schedules page.

    • Fixed missing logs upon user creation.

    • Fixed the issue that prevented jobs from being cancelled.

    • Fixed the issue that was deleting all jobs instead of only the jobs with selected status.

    Known Issue

    • None

    Version 2.35

    Release: April 02, 2024

    Enhancements

    • Audit logs collected on the Settings :: Company tab captures details for whitelist IPs.

    • When users attempt to add a device to more than one site, a warning message is displayed to inform the users that adding the same device to more than one site will remove the device from the old site and the device will be added to the new site.

    Fixed Issue

    The following issues have now been fixed:

    • The error that prevented updating the company information has now been fixed

    • The issue that did not allow clearing a job on the Profiles::Operations tab, has now been fixed

    • The Issue that was preventing the SMTP configuration from restoring has now been fixed

    • The issue that did not allow entering the registration date for a device has now been fixed

    • The issue that incorrectly allowed the cancellation of a failed job has now been fixed

    • The Issue that blocked the activation of the Data Lake App has now been fixed

    • When the device is offline, the WEB and CONSOLE buttons are now disabled 

    • The time zone is now correctly displayed for the logs on the Devices page

    • The CONSOLE and WEB buttons are now enabled for the Failover devices 

    • The plugin field now correctly displays the required information in the Data Lake app

    Known Issues

    • None

    Version 2.34.1

    Release: March 18, 2024

    Fixed Issue

    The following issues have now been fixed:

    • You can now perform a software upgrade on your device from the Devices :: Enrolled tab

    • Log details are now being captured correctly when you download logs from the Tracking :: Logs :: Devices page

    Known Issues

    • None

    Version 2.34

    Release: March 11, 2024

    New Features

    • The default Start Date and End Date are added for the logs on the Tracking :: Logs page.

    • On the Managed Devices :: Devices page, new icons have been added for Raritan and ServerTech.

    Enhancements

    • A message is displayed to inform that a device has been successfully removed.

    Fixed Issue

    The following issues have now been fixed:

    • The same device is incorrectly listed more than once on the Devices Table

    • On the Devices :: Enrolled tab, when you navigate to Device Details the details are not displayed instead a blank page is displayed. This issue is noticed only when the device has a GSM connection

    • The Console and Web buttons are disabled when the device undergoes Failover

    • Failure to delete the backup due to a time-out error

    • The system incorrectly shows that the subscription has expired 

    • A user cannot delete a group due to the following error: Cannot delete the only group with administrators

    • A user cannot delete a file available on the extended storage app due to an unknown error

    Known Issues

    • Log details are not captured when you download logs from the Tracking :: Logs :: Devices page

    Version v2.33.1

    Release: February 23, 2024

    Enhancements

    • Improving access management for device operations for Operator users

    Version v2.33

    Release: January 29, 2024

    Features

    This release includes the following new features:

    •  Introducing new 5-year SKUs for all applications

    Enhancements

    This release includes the following enhancements: 

    • Improved error messages for applying packages incompatible with the Nodegrid version

    • Improved validation of fields within the SD-WAN app

    • Improved the visualization of selected items for filtering within the Subscription Status column on the Subscription page

    Fixed Issues 

    The following issues have now been fixed:

    • The problem with the backup not being deleted has been fixed

    • Files that were not being deleted on the Extended Storage app have now been resolved

    • A fix has been implemented for creating Nodegrid Datalake App backups

    • The issue of the notification number changing when opening the Notifications :: Open page has been resolved

    • Subscription validation for the Extended Storage app has been fixed

    • All device properties are now shown when enrolling in a new company

    Deprecated Interfaces

    • The Details page for devices on the On-premises page has been removed

    Known Issues

    • None

    Version v2.32

    Release: December 18, 2023

    Features

    This release includes the following new features: 

    •   The Job tab now includes a timeline showing the status of the job

    Fixed Issues 

    The following issues have now been fixed:

    • The issue encountered while rescheduling backups that were created without a schedule has now been fixed

    • While applying a profile, you can now correctly sort the profiles based on the Type

    • SD-WAN overlay path now works correctly after network connection updates on the Nodegrid device

    Known Issues

    • None

    Version v2.31

    Release: November 27, 2023

    Enhancements

    • None

    Fixed Issues 

    The following issues have now been fixed:

    • Issues while downloading the Report in the Report App have now been fixed

    • Cellular data information that was not displayed correctly for certain versions has now been fixed

    • The Nodegrid OS Release Date is not showing correctly under Devices :: Enrolled :: Software Upgrade has now been fixed

    • Failure to enroll a device for the first time during the trial subscription has now been fixed

    • SDWAN:

      • Duplicated notifications for the topology events have now been fixed

      • Validation of network range overlap on list builder from SD-WAN has now been fixed

      • Users are now prevented from creating SD-WAN profiles with the same name as default profiles

    Known Issues

    • None

    Version v2.30

    Release: November 16, 2023

    Enhancements

    This release includes the following enhancements: 

    • Added missing API documentation for Profile Templates endpoints

    • Added warning when you move a device from the Enrolled tab to the Available tab to clarify the consequences

    • SDWAN:

      • Enhanced network quality classification to provide clear monitoring insights for better decision-making when selecting the best interface managed by SD-WAN. This helps to optimize systems network performance.

      • The Tunnel Endpoint field now allows flexible configuration, you can specify an IP address or a Domain Name to define the endpoint.

    Fixed Issues 

    The following issues have now been fixed:

    • NSR slots are now correctly displayed on the Device Details page

    • The issue encountered while launching local VMs from the ZPE Cloud has now been resolved

    Known Issues

    • None

    Version v2.29

    Release: October 16, 2023

    What's New in This Release?

    Enhancements

    • For Sites and Groups, the reports have been improved to display online and offline information 

    Fixed Issues 

    • The status is correctly sorted for the failover device on the Data Lake :: Devices page

    • The email notification listing now shows all available emails

    • The following fixes have been done on the Device Details page:

      • The SIM card information is now correctly displayed 

      • For the Connection History graph, the date range selector now allows the correct date selection

    • The following issues were fixed for the SDWAN App:

      • Update of tunnel information during the topology edition 

      • Measurement failing when dotted IP is used as the target in custom settings has now been fixed

      • The monitoring metrics for GSM interfaces now show proper values for latency, jitter, and packet loss

      • In the Monitoring :: Overview device page, the underlay and overlay field now shows the correct jitter value

      • When you change the hub device on topology and the HUB is disabled, the correct tunnel information is now displayed on the Spoke Overlay page

    Known Issues

    • None

    Version v2.28.1

    Release: September 28, 2023

    Enhancements

    • None

    Fixed Issues 

    • Profile output and backup upload which used to fail earlier are now performed successfully for Nodegrid versions 5.8.14 and 5.6.14

    Known Issues

    • None

    Version v2.28

    Release: September 25, 2023

    Enhancements

    • SD-WAN application enhanced to improve the quality of connection.

    Fixed Issues 

    • Failure while loading the monitoring page inside the SD-WAN application has now been fixed

    • The device status chart now displays the correct status

    Known Issues

    • None

    Version v2.27

    Release: September 11, 2023

    New Features

    • Users now have multi-organization access through the parent organization. This allows users to access and manage multiple organizations from the parent account. For more information, see Multi Organization Access.

    Enhancements

    • The Add New user flow has now been modified. For more information, see Multi Organization Access.

    • The authentication method for the Local user can now be changed to SSO, Password, or both.

    • The new company Registration flow is modified. For more information, see Sign Up for a New Account (zpecloud.com)

    Fixed Issues 

    • The Clear Search button now clears the log search field without throwing an error and displays a correct message

    • In the Settings:: Company page, when the IP whitelist is enabled,  you can now save the updated settings when the IP is removed 

    • The number of users displayed on the Groups:: General page matches correctly with the number of groups displayed on the Group:: Devices page while adding a device

    • All the sites are now correctly listed on the Sites page

    • The timestamp is now correctly synced on the Data Lake sensor charts and DeviceDetails page

    • Sorting of  the devices table now works as expected from the SD-WAN app

    • Subnet validation issues inside the Devices page from the SD-WAN app are fixed

    • The Tunnel status on the map and NOC page in the SD-WAN app is fixed

    Known Issues

    • None

    Version v2.26

    Release: Aug 31, 2023

    New Features

    • None

    Enhancements

    • Change in the flow while logging in to the ZPE Cloud. For more information, see Web Page Sign-In

    • Under Profiles > Custom fields, when you edit a custom field, the search field now correctly populates the value based on the selection under the Scope drop-down list 

    • Improvements in the SD-WAN jobs to clear all the data or rules configured by SD-WAN 

    Fixed Issues 

    • Allow the device to run other profiles if a job gets stuck while sending a dynamic profile that contains some undefined variables which prevents reconnection

    • Allow selecting a device that has no version from the Devices :: Enrolled section

    • Allow downloading of the device logs from the Tracking :: Logs :: Devices page 

    • Allow using the Search field to look for the desired device to apply the configuration 

    • Allow cleaning of the underlay subnets information when the device is removed from topology in the SD-WAN App

    • Display the correct device count if a topology has a single device on the NOC page in the SD-WAN App

    Known Issues

    • None

    Version v2.25.2

    Release: Jul 31, 2023

    Features:

    • Added the Apply on Device Reconnect Events filters field on the Add New Configuration page. Using this field, you can apply a profile to a Nodegrid device when it connects for the first time or reconnects to ZPE Cloud. [Read More]

    Version v2.25.1

    Release: Jul 26, 2023

    Bug Fixes:

    • Fixed issue with ACS Url in SSO login

    Version v2.25

    Release: Jul 24, 2023

    Features:

    • Added filters for Profile Types under Profile :: Configurations

    Enhancements:

    • Improved device connectivity chart date labels when viewing its details 

    • Added a new service pack (#23001) to patch undesired behavior inside Nodegrid OS. It prevents overlay paths, created by the SD-WAN app from restarting once the status of the GSM interface is changed

    • Improvements on the Device Details page inside the SD-WAN app

    Bug Fixes:

    • Fixed device details page not showing SIM card information

    • Fixed issues when ordering table under Profile:: Configuration

    • Fixed issues when ordering table under Settings:: SSO

    • Fixed error message during backup for a group of devices

    • Fixed tunnel management operations on the SD-WAN app

    • Fixed the Resync button on the cloud for Nodegrid 5.10.1 and above

    Version v2.24

    Released: Jul 3, 2023

    Features:

    • IdP Initiated SSO is now supported

      • For more information on how to migrate your configurations, see the ZPE Cloud User Guide

    • Added a new connectivity graph to the Device Details page

    Enhancements:

    • Improved remote access stability in more recent versions of Nodegrid

    Bug Fixes:

    • Fixed the Data Lake plugin interval validation

    • Fixed edit issues on profiles for the SD-WAN app

    • Fixed the tunnel management operations on the SD-WAN app

    • Fixed inconsistencies on managed device listing in Dashboard:: Access page

    Version v2.23.1

    Released: Jun 19, 2023

    Bug Fixes:

    • Fixed error in IdP initiate to render the login page with an error message

    Version v2.23

    Released: Jun 12, 2023

    Features:

    • Enable/Disable failover and failback notifications

    Enhancements:

    • Improved device resync error messages

    Bug Fixes:

    Fixed not being able to clean up timed-out jobs

    • Fixed custom field missing scope on edit

    • Fixed save button disabled when re-editing company information

    • Fixed operations table customization not persisting across browsers in some cases

    • Fixed monitoring page from the SD-WAN app

    • Fixed tunnel management operations on the SD-WAN app

    Version v2.22

    Released: May 22, 2023

    Features:

    • Added more details to the Device details page 

    Enhancements:

    • Added SOC 2 Type 1 link on About

    • Improved user navigation

    Bug Fixes:

    • Fixed issue loading Data Lake configuration

    • Fixed issue when pressing enter while logging in using SSO

    • Fixed UI issues on the MFA setup

    • Fixed search in Configuration :: Profiles loading indefinitely

    • Fixed SD-WAN issue where traffic steering to other interfaces fails due to limitation on Nodegrid OS

    • Fixed SD-WAN monitoring not showing overlay paths

    • Fixed update issues on SD-WAN topologies

    Version v2.21

    Released: May 2, 2023

    Features:

    • Added seamlessly update capability to SD-WAN so changes on existing topologies won't generate disruption on tunnels already established.

    • Added selection of SD-WAN paths to display on graphs inside the monitoring page

    Enhancements:

    • Shebang (#!) is added automatically when selecting a language while creating a Profile

    • Added Edit button for Packages

    • Improved navigation on Cloud

    Bug Fixes:

    • Fixed issue with lengthy text in Profile

    • Fixed issue with sorting Devices by Threshold on Data Lake

    • Fixed issue while creating a new password for the User

    • Fixed issue while sorting some columns from the SD-WAN Device table

    Version v2.20

    Released: April 10, 2023

    Features:

    • On the SD-WAN Monitoring page, added a widget to configure display graphs with from/to date/time range.

    • On the Device Details page, added a Resync button to force resynchronization of displayed information.

    • Added Package Installation to Nodegrid through ZPE Cloud.

    Enhancements:

    • Jobs notification now includes Operation ID.

    • Scrolling on the Site table is improved.

    • Profiles can now be searched with their Custom Command Name.

    Bug Fixes:

    • Fixed issue when a Profile was saved after being defined as a Custom Command.

    • The device offline audit log is now correctly updated.

    • Fixed Settings:: Company button being unavailable after the first update.

    • Fixed drill down on sites with space in the name on Dashboard :: Map

    • Fixed display when door sensor is not available.

    Version v2.19

    Released: March 20, 2023

    Features:

    • Added Remote Access buttons to the Device Details page

    Enhancements:

    • Added search to Devices table in Extended Storage

    • Improved error messaging on Extended Storage upload

    • Improved visibility of Forgot Password fields

    • Added option to retry SDWAN jobs that had failed to execute

    Bug Fixes:

    • Fixed mismatch in configurations for Profile :: Operations table between browsers

    • Fixed issue with Dynamic Templates not working for some sites

    • Fixed topology with 3rd Party device not being able to access spoke subnet from Hub.

    Version v2.18

    Released: February 27, 2023

    Features:

    • Added creation of Custom Commands, based on Profiles

    • On Devices Enrolled page, added drawer

    • On Subscriptions page, added filter

    • On SD-WAN app, added Retry button

    Enhancements:

    • On Dashboard Map, added marker clustering

    • Improved text messages for common errors

    • On SD-WAN app profiles, use network manager to create GRE tunnels

    • Added a new endpoint to profile output and backup upload, using a different certificate to improve responsiveness

    • Added notification bar to warn user about communication issues between SD-WAN app and Nodegrid Data Lake app

    • Reduced time between device's status change

    • Improved Nodegrid Data Lake deactivation process

    • Improved Transfer back behavior

    Bug Fixes:

    • In the Profiles section, fixed loader issues

    • Fixed searches when groups are added to devices, and when devices are deleted from topology on SD-WAN app

    • Fixed jobs deployment issues for SD-WAN app

    • On SD-WAN app, Device’s page added validation for link profiles matches

    • Inside SD-WAN app, fixed autocomplete behavior on regular fields

    • In Profile :: Operation :: Jobs, fixed Reload button that loads customizations from the database

    • Fixed Nodegrid Enroll message after transferring to a second company

    • On Custom Fields, fixed creation of profiles.

    Version v2.17.2

    Released: February 6, 2023

    Features:

    • Added SD-WAN Backhauling feature to centralize internet traffic on HUB devices

    Enhancements: 

    • Added capability to persist table customization across different browsers

    • Improved Extended Storage :: Storage table formatting

    • Improved validation error message on SETTINGS :: SSO::Certificate for bad 'Subject Alternative Names'

    Bug Fixes:

    • Fixed SSO certificate configuration to accept more file extensions

    • Fixed Site and Groups device association screen to have pagination

    • Fixed devices wrongly marked as failover status in DASHBOARD :: MAP

    • Fixed Extended Storage upload limit increasing it to 5gb

    • Fixed account details not displaying the edit button

    • Fixed Settings::Account spacing between buttons

    • Fixed SD-WAN Dashboard to display up to 10 thousand devices information

    • Fixed SD-WAN remove from topology operation

    • Fixed Dashboard::Map to display devices without location

    • Fixed devices getting stuck on never connected status after a transfer operation

    Version v2.17.1

    Released: January 16, 2023

    Features

    • Added Refresh button to reload table data on pages that display Nodegrid device information.

    • Added an Empty status for sites that do not contain Nodegrid devices.

    • Added MFA (Multi-Factor Authentication).

    • Added Backhauling capability to SD-WAN hub-spoke topology.

    Enhancements: 

    • Improved Device Details page with a hide/expand-on slot information section.

    Bug Fixes:

    • Fixed Extended Storage file size limit (increased to 5GB).

    • Fixed SD-WAN IPsec tunnel display status.

    • Fixed Nodegrid devices listed as failover on Dashboard :: Map page.

    • Fixed hostname search in Devices :: Enrolled table.

    • Fixed filtering by group name in Dashboard :: Access page.

    • Fixed listing of devices on Topology Edit page in SD-WAN App.

    • Fixes in SD-WAN App Monitoring page data queries.

    • Fixed graphs overlapping in SD-WAN app for small screen sizes.

    • Fixed logic for adding apps with same name in Generic Forwarder app.

    • Fixed sorting by version column and by backup in Devices :: Enrolled table.

    • Fixed missing SD-WAN tag in Profiles :: Operation :: Job page.

    • Fixed icon in Settings :: Company.

    • Fixed sorting in Profile :: Operation :: Schedules table.

    • Fixed job status for Data Lake app.

    Version v2.17

    Released: December 12, 2022

    Features 

    • Added notifications  for SD-WAN App events

    • Added Data Lake Sensors Threshold notifications

    • Added capability to configure the table under PROFILE::OPERATIONS

    • Added option to filter expired subscriptions for the table under CONFIGURATION::SUBSCRIPTIONS

    • Added capability to backup Data Lake App incoming data into Extended Storage App

    • Added capability to send Nodegrid event logs into Data Lake App

    Enhancements

    • Added warning on SD-WAN App monitoring page for Data Lake App subscription expiration

    • Added capability to search for site names for the table under DEVICES:: ENROLLED

    Bug Fixes

    • Fixed sort by uptime for the table under DEVICES::ENROLLED

    • Fixed error to update configuration name or description under PROFILES::CONFIGURATION

    Version v2.16.3

    Released: December 1, 2022

    Fixes

    These have been resolved:

    • Fixed job status reporting for Nodegrid v5.8.

    Version v2.16.2

    Released: November 7, 2022

    Features

    These are new features in this version:

    • Added Group Details to DEVICES :: ENROLLED table

    • Added Sensors threshold information on Data Lake, Device Details page

    Enhancements

    These are enhancements for this version:

    • Improved Success messages on Extended Storage

    • Added Sensors threshold configuration with File Protection

    Fixes

    These have been resolved:

    • Fixed ordering on Diagnostic Log file

    • Fixed Sites table clearing when adding devices

    • Fixed message when trying to remote access a device which has it disabled

    • Fixed Sensors threshold when configuring Nodegrid OS v5.4.13

    • Fixed Sensors threshold warning message

    Version v2.16.1

    Released: October 24, 2022

    Fixes

    These have been resolved:

    • On DEVICES :: ENROLLED, fixed apply Backup operation when multiple devices are selected

    • On PROFILE :: OPERATIONS :: SCHEDULED, fixed deletion of scheduled Backups

    • In Data Lake app, fixed Device Details page when sensors graph has no data

    • In Data Lake app, Devices page, disabling the monitor now works properly

    • In Data Lake app, fixed disable monitoring operation

    Version v2.16.0

    Released: September 26, 2022

    Features

    These are new features in this version:

    • ZPE Status page is available

    • Diagnostic log page added

    • Sensor support available on Data Lake

    Enhancements

    These are enhancements for this version:

    • Improved Apply Software Upgrade process to allow searching

    • On Profiles :: Backup page, all backups can be selected

    Fixes

    These have been resolved:

    • On Dashboard :: Map page, click on Pie Chart redirects to Dashboard :: Access page

    • On Dashboard :: Access page, click on Pie Chart correctly filters device status.

    • On Site :: Devices page, user is properly redirected to device details

    • On Settings :: Subscription page, fixed subscription selection

    Version v2.15.2

    Released: August 17, 2022

    Bug Fixes

    These have been resolved:

    • Fix notification for device connection status

    • Fix Extended Storage app loading issue

    Version v2.15.1

    Released: August 1, 2022

    Enhancements

    These are enhancements for this version:

    • Improved performance of Data Lake data Ingestion

    Version v2.15

    Released: July 18, 2022

    Features

    These are new features in this version:

    • Added Cloudshark template

    • Dynamic Templates

    • Monitoring Page on SDWAN

    • Overlay monitoring on SDWAN

    Enhancements

    These are enhancements for this version:

    • Backups are downloaded with CFG extension

    Bug Fixes

    These have been resolved:

    • Fixed issue with Palo Alto Prisma updating URL incorrectly on update

    • Users with operator permission can drill down into a operation

    Known Issues

    • When topologies are created, Jobs page may report failure. To recover, it is recommended to revert to the previous backup.

    Version v2.14.2

    Released: May 9, 2022

    Features

    These are new features in this version:

    • Mini SR support

    Bug Fixes

    These have been resolved:

    • Fixed issue when 3rd party device is removed from topology

    • Fixed device count in topologies

    • Fixed pagination display on Settings :: Subscriptions

    • Fixed Cancel button behavior on SD-WAN :: Jobs page

    • Add IPsec ID on CLI profile, needed to create topology tunnels with a 3rd party device

    • Fixed generation of XML files for topologies with a 3rd party device

    Version v2.14.1

    Released: April 25, 2022

    Bug Fixes

    These have been resolved:

    • Provided additional connected devices detailed information on Dashboard :: Access

    • Resolved bug on creation of HUB-SPOKE topology

    • Path steering profiles can now be deleted

    • On Enable SD-WAN, Reverse Path Filtering now defaults to disabled

    • Steering for GSM/cellular interfaces is updated

    Version v2.14

    Released: April 18, 2022

    Features

    These are new features in this version:

    • SDWAN Support to 3rd party endpoints

    • SDWAN Support to generate configuration for Palo Alto Pan-OS

    • SDWAN Add default profiles

    • SDWAN IPSec Support

    • SDWAN Monitoring

    • Access control based on IP

    Enhancements

    These are enhancements for this version:

    • Add email notification for installation/uninstallation of Palo Alto Prisma.

    • Add email notification for installation/uninstallation of Data Lake

    • Restore backups on different devices.

    • SDWAN Expand metric collection for SD-WAN

    • SDWAN Improvements on NOC page

    Bug Fixes

    N/A  

    Version v2.13

    Features

    These are new features in this version:

    • Provide feedback on script execution from Profile :: Operations tab or from logs (when Job ID is clicked)

    Enhancements

    These are enhancements for this version:

    • SD-WAN improved UX flow

    • New icons for target devices

    • On Dashboard Map, show site name for devices associated to a site

    • Added capability to restore a backup on a different device from where it was taken

    Bug Fixes

    These have been resolved:

    • On SD-WAN app, devices host name incorrect when using the Add Device to Topology

    • Event of SD-WAN switchover not being displayed

    • Release date missing on Profile :: Software table

    • Missing network interface information on Devices :: Enrolled table

    • Fixed the recurrent backup schedule time comparison that caused some schedules to be skipped

    • Serial number and model name information missing on Profile :: Operation table

     

    Version v2.12

    Features

    These are new features in this version:

    • Introducing SD-WAN app

    • New enrollment method using a claim ID tag

    • Added capability to decommission devices under devices available tab

    • More details for the NSR device model with installed expansion modules

    Enhancements

    These are enhancements for this version:

    • Added new parameter to device software upgrade operation to allow to enforce the boot mode during a downgrade

    • Added password validation before downloading a protected configuration

    • Added improvements on generic forwarder app to expand supported sites

    Bug Fixes

    These have been resolved:

    • Fixed issues with CORS protection

    • Fixed issues with SSO login 

    Version v2.11

    Released: Sep 04, 2021.

    Bug fixes:

    These have been resolved:

    • Failures on backup/restore

    • Sample data installation for Nodegrid Data Lake

    • Session tracking page to show active SSO sessions

    • Profile application being scheduled in two minutes (for the Apply Now option)

    • Users with Operator authorization level are moved from Profile :: Script to Dashboard

    • Users with Operator authorization level are logged out when checking Device Details or Cellular Data

    Enhancements:

    These are enhancements for this version:

    • Improvements on apply profile communication with newer Nodegrid versions

    • Shows details on installed modules (for the NSR)

    • New USB Sensors template for Nodegrid Data Lake app 

    Version v2.10

    Released Aug 23, 2021

    Bug Fixes

    These have been resolved:

    • Solved inconsistencies on email templates

    • Fixed Nodegrid Data Lake integration with password protection feature

    • Fixed Nodegrid Data Lake profile status column after applying profile to devices

    • Solved issues on Nodegrid Data Lake sample data installation

    • Fixed restore backup to operate with only one backup at a time

    • Solved issues in cellular modem upgrade operation

    • Solved issues with email notifications not being sent in some scenarios

    • Fixed duplicated notification for some notification categories

    • Fixed session timeouts on Nodegrid Data Lake dashboard tab

    • Solved inconsistencies on Nodegrid Data Lake plugin categories

    • Fixed applying profile to offline devices on Nodegrid Data Lake 

    • Fixed missing plugins on Nodegrid Data Lake profile creation screen

    • Solved issues with Generic Forwarder app not opening some pages

    • Fixed auto activation of subscription fetching expired subscriptions for Extended Storage app

    • Solved issues with Extended Storage storage capacity update

    • Fixed validator for phone number on account details overlay

    • Solved issues with configuration deletion

    Enhancements

    These enhancements are included:

    • Improved performance of device data collection with new dedicated service

    • Improved synchronization of Nodegrid managed devices on ZPE Cloud

    • Improved Nodegrid logs on ZPE Cloud with refactor of logs page

    • Capability to check status of last script executed on Device details table

    • Dashboard Map page displaying Nodegrid hostname

    • Display of icons for connected devices at Nodegrid

    • Clear password field on failed login attempts

    • Improved Generic Forwarder to accept non-resolved URLs

    • Software Upgrade and Backup pages consistency with Configuration page

    • Added validation for Nodegrid Data Lake profile interval field 

    Version v2.9.0

    Released Jun 14, 2021.

    Items Released

    Bug fixes

    • Fixed Extended Storage App to refresh session token during file upload

    • Fixed issues with unsupported languages

    • Fixed SSO Certificate field at edit page, now able to edit the certificate

    • Fixed downloading files from Nodegrid trough remote access feature

    Enhancements

    • Subscription enforcement

    • Unified configuration and script pages to improve visualization

    • Make files generated by ZPE Cloud Apps available on the new configuration page

    • Support storing device configuration backup into Extended Storage App

    • Enhancements on Extended Storage page

    • Improved hostname column on Devices page

    • Improved visualization of nodegrid released images on Software page

    • NSC and Nodegrid Manager icons updated on Device Details page

    Known Issues

    • ZPE Cloud provider link to download files from ZPE Cloud is incompatible with firewall protected networks. 

    Version v2.8.0

    Released Mar 15, 2021.

    Features

    • Ability to configure a custom e-mail server to receive notifications

    • ZPE Cloud Store Added versioning on Extended Storage

    Bug fixes

    • Fixed device state graph data query

    • Fixed recurrent backups

    • Fixed typo in logs and log separator

    Enhancements

    • Generic forwarder app now allows svg icons 

    Version v2.7.0

    Released Jan 25, 2021.

    Features

    • ZPE Cloud Store Generic Forwarder Application

    • Login on ZPE Cloud via SSO by domain

    • New Tracking icon menu, including Open Sessions, Logs and Notifications

    • Ability to set default configuration or script on newly enrolled devices

    Bug fixes

    • Fixed scheduled operations with support for offline devices

    • Fixed devices' last synchronization time

    Enhancements

    • Change ZPE Cloud logs formats

    • Show cellular modem IP address on device details

    • Visual enhancements on input fields 

    Version v2.6.0

    Released Nov 23, 2020.

    Features

    • ZPE Cloud Store Extended Storage Application

    • ZPE Cloud Store Palo Alto Prisma Application

    • Notifications via SMS

    • Ability to export a list of users

    • New filters on Dashboard Access for Sites and Groups

    • New graph under device details with device state over time

    • Refactor of Dashboard Cellular Data to allow aggregation of multiple devices

    Bug fixes

    • File transfer through Remote Access

    • Delete under subscription, only allows for single subscription deletion

    Enhancements

    • Improvements on device remote access session

    • Ability to download logs

    • Ability to remove ex-employees from any logs

    • Update device coordinates from GPS location

    • Improvement on Transfer Ownership flow, now asking for confirmation 

    Version v2.5.1

    Released Oct 15, 2020.

    Enhancements

    • Help File Updated 

    Version v2.5.0

    Released Oct 05, 2020.

    Items Released

    Features

    • Ability to download the log files

    • Ability to remove ex-employees from any logs

    • ZPE Cloud Store Mobile Application

    • ZPE Cloud Store Reports Application

    • Ability to hide top menu

    • Option to configure recurrent backups

    • Added option to configure SLO (SSO Logout)

    Bug fixes

    • Improve Nodegrid Status synchronization

    Enhancements

    • Ability to edit the user role

    • Added new ZPE Cloud events

    • Cellular data graphs auto scale

    • Ability to personalize login page 

    Version v2.4.0

    Released Aug 31, 2020.

    Features

    • Added option to upload SSO metadata

    • Added support of Single Sign On for the remote access

    • Added support for Ping Identity SSO

    • Added the concept of groups for users

    • Added customization of page header with company logo

    Bug fixes

    • Fixed device to inform when "Enable Remote Access" is disabled

    • Fixed wrong device status after failover

    • Fixed "Close all" notifications button

    • Fixed alerts by email flood on unstable communication

    Enhancements

    • Improved remote access retry mechanism

    • Improved API authorization and authentication

    • Refactored dashboard access tab

    • Refactored overlay (popups) screens

    • Changed the user types SA, CA and GA to the complete names

    • Standardized SSO configuration screen 

    Version v2.3.0

    Released Jul 17, 2020.

    Features

    • SSO with DUO and OKTA through SAML

    • Add button to move device to available - Now devices can be moved from enrolled to available

    Bug fixes

    • Dashboard showing more devices than the company has - The devices in failover were being counted twice

    • Add logs for users login into ZPE Cloud

    Enhancements

    • Remote access - Remote access for console and web are connecting faster

    • Refresh tab when clicking on it- The page is refreshed when the user clicks on the tab

    • Send activation link to new user - The new user form is not requesting password anymore, and an activation link is being sent to the email instead

    • Show the name of the profile and hostname on the Notifications

    • Notifications labels and configurations updated - Modified some labels to improve the readability and added configurations for notifications for groups of devices and single devices being online/offline

    • Add Link to Release Notes - There is a link on about page to access the ZPE Cloud release notes 

    Version v2.2.0

    Released Jun 29, 2020.

    Features

    • Personalized email - For subscriptions (renew and assignment of licenses) and approval/deny accounts the Super Admin user can edit a personalized email to answer the request

    Bug fixes

    • Reset Password - problem - Email template for reset password requests cannot be read using white backgrounds

    • Logo overlapping on mobile email - Email template is overlapping logo on mobile devices

    • Sites Coordinates requires form validation - Coordinates format were not being validated on frontend

    Enhancements

    • Enforce support to Backup and Cellular FW Upgrade - Check if the device has cellular upgrade support to allow the request

    • Refactor - Groups and Sites Tabs - Improved the usability of groups and sites pages

    • Transfer ownership within same company - Blocked the transfer ownership to the same company

    • Remote Device Offline Reload page - Removed wrong message of remote device offline when a device is accessed remotely 

    Version v2.1.1

    Released May 22, 2020.

    Features

    • None

    Bug fixes

    • Changed wrong words in plural form

    • Change Failover color to Orange - “Partial” and “Failover” had similar colors, now “Failover” is orange avoiding confusion

    • Animation problems when uploading FW files in sequence - The upload FW feature was having problems when several firmwares were uploaded together. The progress bar was not showing the correct information

    Enhancements

    • Site detail redirected to Dashboard > Access filtered - When the user clicks on a site pin on Dashboard Page it should be redirected to the Dashboard > Access page

    • Remove Background from Notifications Icon

    • Limit notifications storage per Company 

    Version v2.1.0

    Released May 08, 2020.

    Features

    • Configurable session timeout for ZPE Cloud - Customers can now configure their own Session Timeout under their Account Details tab

    Bug fixes

    • None

    Enhancements

    • Improvements on Settings > Events Improvements on the labels displayed under the tab Settings > Events

    • Improve Error message for Weak Password Improvement on the message shown when the password is being configured 

    Version v2.0.1

    Released May 01, 2020.

    Items Released

    Features

    • None

    Bug fixes

    • Group Alert Offline - Empty Group - Alerting Users that group went offline even with an empty group

    • Issues on User Detail fields - Fixed input text fields to accept capital letters and spaces on it

    Enhancements

    • Update Operations Buttons - Updated buttons with the Upgrade operations to be `Software Upgrade` and `Cellular Upgrade` 

    Version v2.0.0

    Released Apr 29, 2020.

    Features

    • Create a profile and company buttons - Under the User Name on the top of the page, it's possible to check the Account Details and the Company Details as well

    • Device Status Failover - Devices will report to ZPE Cloud if they're running on Failover mode. This will be shown as their status. (REQUIRES UPDATE ON THE UNIT to Nodegrid v4.2.0)

    • Cellular Firmware Upgrade Frontend - Added on Frontend the option to request a Cellular Firmware Upgrade on the cellular modem installed on Nodegrid. (REQUIRES UPDATE ON THE UNIT to Nodegrid v4.2.0)

    Bug fixes

    • Backup not working - Fixed issue with Certificate to launch backup of a device. (REQUIRES UPDATE ON THE UNIT to Nodegrid v4.2.0)

    • Backup And Configuration Permission - Fixed issue with the Companies Backup and Configuration Permission

    Enhancements

    • Removing Cache problem - Improvement on the cache validation of ZPE Cloud

    • Notifications button empty - The notifications dropdown is now shown as empty when the Company doesn't have any notification 

    Version v1.9.0

    Released Apr 20, 2020.

    Features

    • Remote access - WEB/KVM/MKS - This functionality is to launch Remote access of a managed Device via WEB, KVM or MKS

    Bug fixes

    • Accumulated data graph not showing full month - Device was showing Accumulated data sliced on the beginning and end of the graph

    Enhancements

    • Change default number of rows on tables - Updated the default number of rows on each ZPE Cloud page

    • Review rows height for tables - Reduced the height of the rows on the tables

    • Improvements on uptime display - Improved messaged showed for the uptime based on the device status

    • Change backup button label - Change button to create a new backup of devices to be `Backup` instead on `Apply Backup` 

    Version v1.8.1

    Released Apr 16, 2020.

    Features

    1. None

    Bug fixes

    1. Notifications and Alerts for Profiles operations not working

    Enhancements

    1. Resize email selection dropdown under Alerts configuration 

    Version v1.8.0

    Released Apr 15, 2020.

    Features

    1. ZPE Cloud Notifications - Now sites and group becoming offline will be notified and alerted to customer if they configure it. Operations(Configurations, Scripts, Upgrades and Backups) completed will generate a notification

    Bug fixes

    1. Multiple Backup operation for the same device - Fixed an issue where multiple backups could be restored simultaneously to a device

    Enhancements

    1. Modify Dashboard subtabs sequence - Access subtab is now shown before Cellular Data subtab

    2. Add column with checksum of the Backup on Profile -> backups page - Added a column under Profiles > Backups to show the checksum of the backup file 

    Version v1.7.0

    Released Apr 09, 2020.

    Features

    1. None

    Bug fixes

    1. None

    Enhancements

    1. Remove option to login with username

    2. Change Customer Admin to Company Admin 

    Version v1.6.1

    Released Mar 20, 2020.

    Features

    1. Update Help button with the ZPE Cloud User Guide

    Bug fixes

    1. Cellular graph `undefined` Label

    2. Cellular graph needs space on X axis

    3. Add device Status to Access tab

    Enhancements

    1. Devices Page improvement - Improved the loading of devices

    2. Disable Access button for devices that doesn't have access support

    3. Review Profiles subtabs names

    4. Make Sign up page copyright message similar to Login Page

    5. Firmware file list should be sorted the other way around, newest file first in all screens 

    Version v1.6.0

    Released Mar 03, 2020.

    Features

    1. Device backup configuration frontend

    2. ZPE Cloud Components Version - About page

    3. Added ‘First Connection’ to the profiles page

    4. Upload of Software Release Image

    5. Device Identification with Hostname

    Bug fixes

    1. Dashboard > Map With size problem

    2. Access showing device as child after changing hostname

    3. SIM tx/rx data values on the y axis of graph are not proper

    4. Devices page showing wrong information and linking to wrong devices

    Enhancements

    1. Define color and text buttons pattern

    2. Tables with too much empty space

    3. Add pagination for access tab

    4. Improvements on Software Version

    5. Improvements Cellular data graph

    6. Mention Max file size that can be loaded to profiles and scripts 

    Version v1.5.1

    Released Jan 24, 2020.

    Features

    1. Lock and Unlock users

    2. Remote Access (Web/Console) for Nodegrid

    3. Remote Access (Console) for Managed Devices and Ports

    Bug fixes

    1. SIM ACC Data wrong date

    2. SIM ACC - Add scale for the Y axis

    3. Upgrade Device without selecting a schedule -> the scheduled for date is for year 1970

    Enhancements

    1. Show Active SIM Card

    2. Change Copyright message in zpe web 

    Version v1.4.3

    Released Dec 16, 2019.

    Features

    1. None

    Bug fixes

    1. None

    Enhancements

    1. Updated NGINX 

    Version v1.4.2

    Released Dec 11, 2019.

    Features

    • None

    Bug fixes

    • Page Profile -> Operations - Job Status not working, Weird behavior of 'Registered' and 'Scheduled for' columns

    • Summary of devices isn't being updated after Enrolling them

    • Error searching sites

    • Profile -> Operations -- Search, Sort and 'Scheduled For' issues

    • Profile -> Operations -- Search working only by Profile Name

    • Profile -> Operations -- Wrong timezone for 'Scheduled for'

    • Sites and Devices pages duplicating information after search

    • Fix misspelling under Sign up page

    Enhancements

    • None 

    Version v1.4.1

    Released Nov 27, 2019.

    Features

    • None

    Bug fixes

    • Any click outside the Add user pop up box collapses the user form

    • Group search in customer admin not working except on the first page

    • Devices table - Search problem

    • Search is showing wrong results after changing page

    Enhancements

    • None 

    Version v1.4.0

    Released Nov 22, 2019.

    Features

    • ZPE Scheduled Device Operations

    Bug fixes

    • Job id is not being shown on Logs -> Device Logs page

    Enhancements

    • Add a summary line above map view representing (total company and devices/sites etc)

    • Update Device Logs column name

    • Uptime string too big

    • Updated Hostname column position under Devices table 

    Version v1.3.2

    Released Nov 14, 2019.

    Features

    • None

    Bug fixes

    • Failed to load Devices Table last page

    • ACCUM data - Remove arrow renew day

    • Accum data - change label

    • Signal strength is shown as NULL under Device Details

    Enhancements

    • None 

    Version v1.3.1

    Released Nov 11, 2019.

    Features

    • None

    Bug fixes

    • Customer Admin - Different number of devices

    • Device enrollment through API

    Enhancements

    • None 

    Version v1.3.0

    Released Nov 08, 2019.

    Features

    • Include device hostname information

    • Add field "Revision Tag" for Devices

    • Keep track of last profile applied on the device

    • Add `model` value to enrollment API

    • SIM Cards Accumulated Data

    Bug fixes

    • Address field in Companies is not long enough to display information

    • Device Logs -> No details found but still displaying logs

    Enhancements

    • None 

    Version v1.2.1

    Released Oct 29, 2019.

    Features

    • None

    Bug fixes

    • Group Admin seeing devices from Customer Admin

    • Logs page - Date filter is not working properly

    • Not able to edit user details in Customer Admin

    Enhancements

    • Add By Key - Improve message with Invalid Serial Number

    • Improve Reset Password Email

    • Add Never Connected state to Dashboard

    Version v1.2.0

    Released Oct 16, 2019.

    Features

    • Add Devices by Key

    Bug fixes

    • Device Logs not being showed

    • Device status is wrong under Site and Group pages

    Enhancements

    • None 

    Version v1.1.2

    Released Oct 08, 2019.

    Features

    • Add 3rd state for the device Never Connected

    Bug fixes

    • Two CPU columns under Devices table

    • ZPE Cloud Logo changing

    • Last Name position Editing User

    • Modem info not being showed

    • Footer is hiding ZPE Systems trademark

    Enhancements

    • Header for Customer Admin is showing User Full Name and Company name

    • Add Column IMEI and Firmware version 

    Version v1.1.1

    Released Sep 22, 2019.

    Features

    • Device Transfer Ownership

    Bug fixes

    • None

    Enhancements

    • None

     


    Was this article helpful?

    ESC

    Eddy AI, facilitating knowledge discovery through conversational intelligence